Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Im starting a new Swaging Die Business - INPUT NEEDED!

 
LinkBack Thread Tools Display Modes
  #1  
Old 11-20-2011, 06:05 PM
Junior Member
 
Join Date: Nov 2008
Posts: 10
Im starting a new Swaging Die Business - INPUT NEEDED!

Hello everyone. I am starting a new bullet swaging die making business, and would like some feedback from this wonderful community. Im sure you all know, but if you dont. Swage dies are dies that you use in a reloading / swaging press that are used to make jacketed rifle bullets. The bullets made in these dies are easily more concentric, and consistent than their store bought counterparts. The reason that im starting this business, is that its something that im simply passionate about, and i happen to have some nice equipment. I got into long range shooting several years ago, and have had several very long shots on big game and coyotes alike. I became interested in bullet design shortly after getting into shooting those long distances.
So, here is my inquiry for all of you serious reloaders out there. When i start this small business, what kind of dies would you guys purchase (not assuming that you will, but what kind would you buy if you were interested in doing so). I have CNC machines, that will be able to build die reamers with relative ease, so the dies will cost considerably less than say, corbin or an outfit like that. Im not sure what i will charge for a set of dies, but im thikning somewhere near the 350-400 range for a flat base die set.
The dies that i planned on making would be .224 Using fired .22LR jackets, some Low drag .243's, low drag .257's, low drag .264's, low drag .284's, low drag .308's, and low drag .338s. I planned also on making dies to swage .458 paper patch bullets for those 45.70 shooters out there. Another neat idea may be some whisper bullets... not sure if people would buy them, but hes, its worth a shot. Whisper's are Round nose, boat tail bullets that are to be used in subsonic applications. Anyhow, if you guys get a free second, PLEASE leave me some feedback on what you would be most interested in. I have spent many many hours reading the wonderful stories on this website, so your input and interests will be a definite deciding factors in my decisions for this business in the near future. Let me know, and if there is some interest in my operation on this site, i will post my website (as soon as i finish programming) http://www.longrangehunting.com/foru...cons/icon9.gif

Thanks agian, and look forward to hearing from you.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Im starting a new Swaging Die Business - INPUT NEEDED!
Thread Thread Starter Forum Replies Last Post
Painting a stock-input needed crittrgittr The Basics, Starting Out 16 09-20-2011 04:26 AM
Painting a stock-input needed crittrgittr Long Range Hunting & Shooting 12 09-11-2011 09:31 AM
California Elk, input needed. 7mmpoppy Elk Hunting 3 05-30-2011 01:05 PM
Starting to put together the build list. Input appreciated. 7ultra Rifles, Bullets, Barrels and Ballistics 4 08-17-2009 10:01 PM
TRG-S .338 Lapua - lots of input needed Duffy The Basics, Starting Out 7 01-30-2007 10:58 AM

Current Poll
In the last 12 months, what was your longest rifle kill on big game?
0 to 200 yards - 25.96%
1,531 Vote
201 to 400 yards - 32.12%
1,894 Vote
401 to 600 yards - 23.08%
1,361 Vote
601 to 800 yards - 10.01%
590 Votes
801 to 1,000 yards - 3.92%
231 Votes
Over 1,000 yards - 4.92%
290 Votes
Total Votes: 5,897
You may not vote on this poll.

All times are GMT -5. The time now is 10:21 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC