close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

I'm going to bed my VS stock.

LinkBack Thread Tools Display Modes
  #1  
Unread 08-29-2003, 07:09 AM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
I\'m going to bed my VS stock.

After getting my VS back from Remington, "Barrel pulls left when guard screws are tightened", I took the stock off for the first time and noticed somebody took a little metal off the right side of the bedding block, and when I put the action back in I had a hard time getting it to where it was when it came from Gander MT. from which I sent the rifle, also noticed 2 'spikes' if you will, on the front corners(contact spots) of the bedding block, where it's making more contact than on the rest of the bedding block, so now, who can I send this rifle to, to get a good bed job, preferably in the midwest area? Jay
Reply With Quote
  •   #2  
    Unread 08-29-2003, 07:44 AM
    Platinum Member
     
    Join Date: Jul 2003
    Location: Central PA
    Posts: 1,307
    Re: I\'m going to bed my VS stock.

    jay--i did the same thing...myself. it's super easy to do yourself. get some brownells steel-bed or jb-weld, or some other epoxy, preferrebly with metal in it. devcon aluminum putty is what theguys on BR told me.

    all you need to do is rough up the aluminum and smear on the goop and tighten the screws and let it cure.

    make sure you get it behind the lug too, but if it shoots good floated, leave the barrel alone.

    EM me if i can help you out. i've done this to my VS with great success.

    Jason
    __________________
    Check it Out!!--> Shoot the Smack The Smiley Match...and help AmericanSnipers.org
    Reply With Quote

      #3  
    Unread 09-02-2003, 06:42 PM
    Gold Member
     
    Join Date: May 2001
    Location: Urich, MO
    Posts: 838
    Re: I\'m going to bed my VS stock.

    Jay, I would suggest Marine Tex. It's a little easier to use than most of the other stuff. I bed about 10 rifles a week in it and have used em all and I like it the best. If you want to do it yourself give me an email at imthingtwo@yahoo.com and I'll walk you through it. There's a couple of tricks to bedding an HS that will make it easier.
    Chris
    __________________
    Chris Matthews
    www.longshotriflesllc.com
    Reply With Quote
      #4  
    Unread 09-02-2003, 07:35 PM
     
    Posts: n/a
    Re: I\'m going to bed my VS stock.

    Check out this link to a thread I made on the campfire... http://69.64.32.53/ubbthreads/showfl...49753&Search=t rue#Post155172
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: I'm going to bed my VS stock.
    Thread Thread Starter Forum Replies Last Post
    Richard's Microfit laminated stock or Medalist stock??? sharktown Equipment Discussions 7 11-13-2011 08:17 PM
    Stag A2 Stock- Stock Only- Brand New- $30 Shipped JLamb11 Gun Parts - Stocks, Barrels, Actions, etc. 0 06-04-2010 05:48 PM
    Stock comparison: Manners MCS-SL vs. MPI mountain rifle stock McStern Rifles, Bullets, Barrels & Ballistics 1 05-22-2010 12:46 PM
    WTB/WTT Rem 700 LTR stock/equal. and Model 7 custom syn. stock 6.5BR Gun Parts - Stocks, Barrels, Actions, etc. 0 10-23-2007 09:45 AM
    FS:Remington700 Right hand long action Sendero stock & LA PSS stock. smack Guns For Sale 1 03-25-2007 07:50 PM


    All times are GMT -5. The time now is 08:09 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC