Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Ideal balance point for rifle ( 6.5 WSM loads??)

LinkBack Thread Tools Display Modes
Unread 05-04-2002, 10:41 AM
Bronze Member
Join Date: Aug 2001
Location: Winnipeg, MB
Posts: 41
Ideal balance point for rifle ( 6.5 WSM loads??)

I am doing the finishing touches on a rifle that I am building for F class and need to know what the ideal point of balance should be. Just for interest sake, I'll let you know what the package is. I'll get Ross to post a pic on our site tonight of what it looks like. It is one of our Timberwolf actions but shortened up to short action lengths, integral 20 MOA base. Pac-Nor supermatch 1-8 twist 6.5mm ( full length WSM) 1.3" shank taper to .95" @ 30" finish. Purple marble Shehane Tracker with lots of lead. I have the ability to add/remove lead to the stock easily to acheive balance, with scope I am limited to 22 Lbs. If anyone has any experience with the full size 6.5 WSM, I would appreciate it as well, I hope to get a bunch of the LRB bullets to try, and shoot the World Championship with this summer.

Thanks for your help,

Steve Altstadt

[ 05-04-2002: Message edited by: Steve Altstadt ]
Reply With Quote
  •   #2  
    Unread 05-04-2002, 02:30 PM
    Bronze Member
    Join Date: Aug 2001
    Location: Winnipeg
    Posts: 30
    Re: Ideal balance point for rifle ( 6.5 WSM loads??)

    New 6.5 WSM

    web page
    Reply With Quote

    Unread 05-29-2002, 08:35 PM
    Junior Member
    Join Date: Feb 2002
    Location: Danville, PA
    Posts: 9
    Re: Ideal balance point for rifle ( 6.5 WSM loads??)

    Just built a rifle for my father in 6.5 WSM and did velocity/pressure testing (peak strain meter) to start him off with some loading data.
    M700 long action
    HSprecision sporter stock
    Douglas XX air gauged 26.5" barrel #5 taper 1 in 8" twist
    fireformed case capacity 80.5gr H2O

    Essentially it is the 264 win mag. You can look in a reloading book (Nosler) match the maximum velocities and come up with a maximum pressure. I don't see any velocity advantage. Accuracy has been good with some one hole groups at 100 yds(95gr Hornady VMAX,~3600fps, ~60000psi). Cases tend to stick more easily than standard cartridges even at reasonable pressures. Usually occurs after three firings. We think this is due to minimal case taper and the larger diameter case placed in a classic M700 construct and shot at the 65000psi maximum. We have been forced to full length size cases on a more regular basis. Perhaps a larger diameter barrel shank in a custom action could help with this problem. Or we may have to accept a lower maximum pressure. We are still in the early testing stages.

    [ 05-29-2002: Message edited by: grkldoc ]
    Reply With Quote


    Thread Tools
    Display Modes

    Similar Threads for: Ideal balance point for rifle ( 6.5 WSM loads??)
    Thread Thread Starter Forum Replies Last Post
    Rifle Balance? edge Rifles, Bullets, Barrels & Ballistics 11 05-19-2011 07:31 AM
    A5 rig, balance point question KurtB Rifles, Bullets, Barrels & Ballistics 4 12-19-2010 12:33 AM
    How is correct rifle balance/handling achieved? benchracer Gunsmithing 2 02-07-2010 06:09 PM
    Rifle Balance ? edge General Discussion 3 12-13-2006 09:53 AM
    Ideal hunting rifle trigger pull?? jasonk_jasonk Long Range Hunting & Shooting 24 04-25-2006 06:35 PM

    All times are GMT -5. The time now is 05:07 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC