Re: hs precision 7wsm twist rate
That's easy enough to check yourself. Clean the rifle as you normally would. You will need the following, a bore guide, cleaning rod with good rotating handle, patches that tightly fit the bore. Run a tight fitting patch thru the bore guide, into the rifling 4" or 5". Measure from the back of the bore guide back 8" and make a mark on top of the rod with a marker. Wrap a piece of tape around the rod if needed so you can make a mark you can see. Make another mark at 9" and another at 10". Pust the patch forward slowly and watch the cleaning rod rotate. Which ever mark comes back up, because of the rotation, is the twist rate. Or,, call H-S , have the serial number ready , they will have a record of how that rifle left their shop.
"Shoots real good!": definition; it didn't blow-up in my face.