Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


How fast will she burn out & break in????

LinkBack Thread Tools Display Modes
Unread 04-10-2010, 09:14 PM
Junior Member
Join Date: Apr 2010
Posts: 2
How fast will she burn out & break in????

I recently bought a new BLR lightweight in a 243. What should a person do for breaking it in???? As well, I'm looking for some feedback from some of you really experienced handloaders as far as speed??? I have been loading some 85 gr HPBT Sierra Matchkings, loving them. But I was thinking of trying to load up something 55-65 grains. I'm wondering at what muzzle velocity would I be risking burn out the barrel???
Reply With Quote

Unread 04-10-2010, 11:07 PM
Platinum Member
Join Date: Dec 2001
Location: Potters Hill, NC
Posts: 1,676
Re: How fast will she burn out & break in????

Welcome to LRH. That's a nice rifle you have there. That was my Dad's pick also. He liked anything John Browning made but picked the BLR because he was a lefty.
For breaking in a barrel I usually clean after every shot for the first 15-20 shots, then after every 3-shot group for 15-21 rds. After that it really depends on the rifle and how quickly it fouls up and the accuracy goes south. There are probably tons of info on there about breaking in a barrel. Some of the barrel makers (Lilja, Kreiger, etc.) put recommendations on their websites for their barrels but it can be modified and applied to any barrel.
I shoot the .243 alot and with the 85gn bullet you should easily be able to achieve 3200fps with good accuracy. I am currently shooting the 95gn pills at 3100fps but as soon as I get my back stops/ranges set up here in Ga, I'll be working up loads with the 85gn BT HP GameKing's.
I have heard the .243 is a barrel burner but I haven't had that to be the case as I have never shot one enough to toast it. My current .243 I bought used but not hurt and I have run about 750rds through it. It prints 1/4" groups consistently.
My Dad burnt out the barrel on his BLR in .243. I really think he just wanted a longer, custom barrel. He sent his to McGowan Barrels and they screwed on a Douglas (I think), 26" light varmint. It was remarkably accurate when he first got it back but I haven't seen that accuracy since he left it to me, but I really haven't tried or shot it very much. I'm not sure how many rounds he has down this tube.
I don't know that there is a specific velocity that burns a barrel out. There's gonna be alot of heat when the cartridge goes off no matter what. With that said, if you start approaching 4000fps, as you will with 55gn bullets, barrels don't seem to last long. Not sure if your rifle will be able to approach that velocity as it's 22", isn't it? Anyway, give them a try, keep your barrel clean and cool and you should be OK. JohnnyK.
"The only thing necessay for the triumph of evil is for good men to do nothing."
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: How fast will she burn out & break in????
Thread Thread Starter Forum Replies Last Post
Anyone else have lighted nocks break in fast bow? Andy Backus Bowhunting 7 01-12-2011 12:05 PM
US 869 burn rate? specweldtom Reloading 8 04-08-2009 06:33 PM
burn rates rotorhead Reloading 4 05-08-2007 07:17 AM
How much will burn? edge Reloading 9 06-13-2006 12:19 AM
Barrel burn out KRob Rifles, Bullets, Barrels & Ballistics 5 05-26-2005 08:23 PM

All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC