Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

help me with my rebuild ideas

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-06-2012, 06:08 PM
Junior Member
 
Join Date: Jun 2012
Posts: 24
help me with my rebuild ideas

hey everyone im new on here and i need some advice on rebuilding my rem 700 .243 bdl. basically my plan is do a 700police clone in .308 with a mike rock 5r [m40 contour] and im been going back and forth trying to decide between sticking with the short action or getting a 30-06 action[with .308 bolt face] because im wanting to shoot either 190 or 210 vlds for long range hunting on whitetail deer and if i chose the la i could load the vlds out further and still be able to use the bdl b.m and not be reduced to a single shot. ive got a place out in the country thats a mile long by a half mile wide so i have room to stretch the legs out of this rifle, and ive ran some numbers thru jbm for the 208 amax at 2600fps[i have yet to run the #s for the 190 & 210 vld though] but i was curious if there would be any ballistic advantage if i chose the 190 over the 210? this is my first rebuild and i want to do everything right the first time so which route would be the most viable for me and would i be insulting anyone by trying to trade my sa for a 30-06 la straight across? ive come to the point were i cant make up my mind which way would be the best/easiest and still be safe. any help is very much appreciated
Reply With Quote
  #2  
Old 06-06-2012, 06:16 PM
Platinum Member
 
Join Date: Jan 2008
Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
Posts: 4,394
Re: help me with my rebuild ideas

If you switch to a LA and keep the 308 round your going to experience feeding issues during rapid bolt manupilation. You can use vld type bullets with no issues if you have you smith install a wayats center fed mag box in your rifle.

Jon
__________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
If you want to shoot Bergers start here!
http://www.longrangehunting.com/arti...accuracy-1.php
Reply With Quote
  #3  
Old 06-06-2012, 06:50 PM
Junior Member
 
Join Date: Jun 2012
Posts: 24
Re: help me with my rebuild ideas

Quote:
Originally Posted by ICANHITHIMMAN View Post
If you switch to a LA and keep the 308 round your going to experience feeding issues during rapid bolt manupilation. You can use vld type bullets with no issues if you have you smith install a wayats center fed mag box in your rifle.

Jon
im glad you told me that. i didnt think the la would cause feeding issues. ill look into that setup. anything else ishould know?
Reply With Quote
  #4  
Old 06-06-2012, 09:46 PM
Platinum Member
 
Join Date: Jan 2008
Location: SOCIALIST CONTROLLED TERRITORY OF NEW YORK
Posts: 4,394
Re: help me with my rebuild ideas

Quote:
Originally Posted by rem700man View Post
im glad you told me that. i didnt think the la would cause feeding issues. ill look into that setup. anything else ishould know?
30-06 and 308 have the same bolt face But seriously pick a good smith, there are a bunch here. Listen to there advice they know what they are talking about, get your bolt handle tig welded on and have a sako or m16 style extractor put on your bolt. Forget the 11degree target crown get a recessed crown. M40 countour is heavy just FYI I went small and I could not be more pleased. Read the artical on the 308 win on the home page its by a guy named Michel.

Jon

Oh ya never pay retail
__________________
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
If you want to shoot Bergers start here!
http://www.longrangehunting.com/arti...accuracy-1.php
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: help me with my rebuild ideas
Thread Thread Starter Forum Replies Last Post
M24 rebuild program rancilio Rifles, Bullets, Barrels & Ballistics 4 11-05-2013 06:05 PM
Savage 22-250 rebuild feelinducky Gunsmithing 3 12-12-2011 11:30 AM
Savage 110 rebuild! Bill Maylor Equipment Discussions 0 09-04-2009 06:02 PM
remington sps rebuild help hglucky13 Gunsmithing 13 12-16-2008 08:39 PM
7mm wsm rebuild loaders_loft Rifles, Bullets, Barrels & Ballistics 4 07-11-2008 01:21 PM


All times are GMT -5. The time now is 06:19 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC