Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


help with 6.9spc

LinkBack Thread Tools Display Modes
Unread 04-09-2013, 06:25 PM
Junior Member
Join Date: Jan 2008
Posts: 17
help with 6.9spc

was looking to make a 6.8 spc for an ar. i was looking at 20-24 inch bull bore.
I was wanting opinions on length, twist and lands. i know i want the target crown not the threads.
what say you?
Reply With Quote

Unread 04-12-2013, 04:30 PM
Silver Member
Join Date: Oct 2010
Location: Watertown, SD
Posts: 322
Re: help with 6.9spc

it's a good round, I have made quite a few barrels in it. I use a 6.8 SPC II spec reamer as do all of the other guys that know what is going on with the round. You still see some of the standard SPC chambers out there but most are the II
Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 09:13 PM.

All content ©2010-2015 Long Range Hunting, LLC