close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

H335 recipie for .308 and 168 gr moly coats

LinkBack Thread Tools Display Modes
  #8  
Unread 03-20-2003, 11:12 AM
Bronze Member
 
Join Date: Mar 2003
Location: Idaho
Posts: 68
Re: H335 recipie for .308 and 168 gr moly coats

4ked Horn,
Are you still researching loads! How bout you load some and go shoot some groups! If I'd have known this I would have just givin' you the bullets, loaded already. I will be visitin' soon and I want to go shoot! Break down and buy some Varget ya tite @#$! Compare and pick the best load so we can do some serious blastin. If I show up in April and your still deciding I will disown you and speak badly about you in church.
Ha! Good Luck, Dave.
Reply With Quote
  •   #9  
    Unread 03-21-2003, 10:12 PM
    Platinum Member
     
    Join Date: Jun 2007
    Posts: 1,515
    Re: H335 recipie for .308 and 168 gr moly coats

    Big Al is going to share some varget with me to see what happens. [img]images/icons/grin.gif[/img]

    That tight@$$ you refered to was tightened by the wife. Dude, we're broke. [img]images/icons/frown.gif[/img]

    OH, Check your email and see what I found about moly coat bullets. [img]images/icons/shocked.gif[/img]

    Al and I are going out sunday A.M. Call me. [img]images/icons/smile.gif[/img]
    __________________
    GRAVITY. It's not just a good idea. It's the LAW!
    Reply With Quote

      #10  
    Unread 03-21-2003, 10:19 PM
    Platinum Member
     
    Join Date: Jun 2007
    Posts: 1,515
    Re: H335 recipie for .308 and 168 gr moly coats

    Thanks Jay. It is sounding like I am just going to have to experiment a little just like every other load. Was hoping to save a little time with a published recipie but the powder makers dont seem to like goobering up their high$$$ test barrels woth moly.

    Thanks for the input.

    P.S. Gonehuntingagain and Dave in idaho should follow your example on offering polite and useful information on this fine forum.
    __________________
    GRAVITY. It's not just a good idea. It's the LAW!
    Reply With Quote
      #11  
    Unread 03-22-2003, 07:40 PM
    Silver Member
     
    Join Date: Mar 2003
    Location: Schofield, WI.
    Posts: 323
    Re: H335 recipie for .308 and 168 gr moly coats

    Horn, What I usually do is take the max load and subtract 2-3 grains of powder in a 308 size case and work up in increments of 1/2gr. It takes a little more time but you want make sure your loads are safe. Let us all know by posting your accuracy results, I'm curious, you should get around 3/8 or less if your barrel is pretty descent. What kind of rifle you using, anyway? Jay [img]images/icons/cool.gif[/img]
    Reply With Quote
      #12  
    Unread 03-24-2003, 09:43 AM
    Silver Member
     
    Join Date: Mar 2003
    Location: Boise, Idaho
    Posts: 419
    Re: H335 recipie for .308 and 168 gr moly coats

    If we didn't give you such a bad time, you would think that we didn't like you anymore. [img]images/icons/grin.gif[/img]
    __________________
    I keep nature balanced - I hunt everything!
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: H335 recipie for .308 and 168 gr moly coats
    Thread Thread Starter Forum Replies Last Post
    IMR 8208 recipie tfosters01 Reloading 4 03-06-2011 08:40 PM
    H335 powder? diamondmfarms Reloading 7 07-25-2009 08:08 PM
    280 ackly recipie 338 LEGEND Long Range Hunting & Shooting 0 03-09-2009 06:23 PM
    .243 Winchester - 55 NBT's - H335 300winnie Reloading 4 01-07-2008 03:41 PM
    Apple pie recipie. 4ked Horn General Discussion 21 11-19-2005 10:03 AM


    All times are GMT -5. The time now is 11:23 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC