close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

H1000 in a 24" barrel

LinkBack Thread Tools Display Modes
  #1  
Unread 08-07-2012, 04:22 PM
Junior Member
 
Join Date: May 2012
Posts: 15
H1000 in a 24" barrel

I am going to try reloading 162 A-max and 168 Bergers in my 7mm RM. I have read numerous good things about H1000 for these rounds but they have almost all been with a 26" barrel. Does anyone have any experience with this powder in a 24" barrel or have any recommendations for a good powder?
Reply With Quote
  •   #2  
    Unread 08-07-2012, 06:30 PM
    Silver Member
     
    Join Date: Nov 2010
    Location: Southern United States
    Posts: 284
    Re: H1000 in a 24" barrel

    Quote:
    Originally Posted by Savagekid View Post
    I am going to try reloading 162 A-max and 168 Bergers in my 7mm RM. I have read numerous good things about H1000 for these rounds but they have almost all been with a 26" barrel. Does anyone have any experience with this powder in a 24" barrel or have any recommendations for a good powder?
    QuickLOAD 3.6 suggests you will lose 60 fps going from a 26" to a 24" barrel with a max load of H1000 and a 162 A-MAX. This makes sense as heavy bullets don't usually suffer as much velocity loss with a slight barrel shortening than light bullets.
    Reply With Quote

      #3  
    Unread 08-07-2012, 11:02 PM
    Platinum Member
     
    Join Date: Jan 2011
    Posts: 2,206
    Re: H1000 in a 24" barrel

    I load for 4 7mm rms, a 24", 2 26", and a 28". The 26s and 28 does great with H1000 and 162 or 168s and the 28 likes 180s with Retumbo as well, but I get horrible extreme speads in the 24" with H1000, velocity is great, but its all over the place due to not getting a full burn. Some have good luck with H1000 in a 24" barrel, but I get the best all arounds results with H4831sc with velocity avg of 3032 with 162s. It does well in the 26s as well but is not a good choice for a 180grn bullet.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: H1000 in a 24" barrel
    Thread Thread Starter Forum Replies Last Post
    What bullet/powder recomendation? 308win, 1in9" twist, 22" barrel Ultra25-06 Long Range Hunting & Shooting 4 11-09-2010 02:51 PM
    wtt 20" heavy barrel upper for 20" or 24" bull barrel mike1113 Guns For Sale 1 03-19-2010 11:08 AM
    22" vs. 24" vs. 27" barrel; velocity differnce on a .260? scottl0000@hotmail.com Rifles, Bullets, Barrels & Ballistics 4 02-17-2010 08:09 AM
    Retumbo, H1000 Barrel Length??? ovastafford Reloading 6 02-09-2010 05:12 PM
    SENDERO 7 Mag " UNFIRED " FLUTED TAKE-OFF BARREL jbo Gun Parts - Stocks, Barrels, Actions, etc. 5 10-22-2009 12:04 PM


    All times are GMT -5. The time now is 11:19 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC