Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Gunsmith for chambering long barrels

LinkBack Thread Tools Display Modes
Unread 06-09-2003, 01:01 PM
Platinum Member
Join Date: Jun 2007
Location: Wilmington NC
Posts: 4,751
Gunsmith for chambering long barrels

Some of the guys were looking for a gunsmith that can chamber barrels longer than 36". John Myer at Custom Gunsmithing in Boyce VA (near Winchester) can chamber 1.450 diameter barrels up to 44 inches. He is adding onto his shop and will upgrade lathes later this summer so can go even longer then. Phone is(540) 837-2598.

Really good 1k/BR gunsmith that knows what he is doing. He also runs his own cryo facility.

My heavy gun he built shot a 5.914" for 10 shots Sunday.

Reply With Quote
  • Reply


    Thread Tools
    Display Modes

    Similar Threads for: Gunsmith for chambering long barrels
    Thread Thread Starter Forum Replies Last Post
    stevens model 200 long action chambering options poloairsoft Rifles, Bullets, Barrels & Ballistics 0 07-21-2011 03:52 PM
    Long Barrels For Better Penetration Broken Brow Turkey Hunting 0 07-10-2011 09:18 PM
    Long Barrels For Long Range Broken Brow Turkey Hunting 0 07-06-2011 07:47 PM
    Where to get long barrels tom baker Rifles, Bullets, Barrels & Ballistics 3 06-25-2003 06:58 PM
    338-378 Accumark barrels how long gone? dgr416 Long Range Hunting & Shooting 0 03-18-2003 10:16 PM

    All times are GMT -5. The time now is 04:05 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC