Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


gun value

LinkBack Thread Tools Display Modes
Unread 01-10-2008, 10:20 PM
Silver Member
Join Date: Jan 2008
Posts: 170
It had the old style monte carlo stock with the black dot and the serial is G957728 I think I had a 7mm mauser that was loaned to me but the guy was just hiding it at my house from his kid and decided he wanted it back.This gun was given from a relative who collects guns and the stock I ordered was for a pre 64 and it fit that's about all I know.
Reply With Quote
  •   #9  
    Unread 01-11-2008, 11:58 AM
    Junior Member
    Join Date: Jul 2006
    Posts: 5
    7 mag


    I looked in the bluebook, and it appears that there were no 7mm mags till about 1965. If you have a current B/B check it out. If it is a featherweight, yours is still a very desirable rifle, maybe only available for two years [91-92].


    Last edited by 3589; 01-11-2008 at 12:10 PM.
    Reply With Quote

    Unread 01-11-2008, 11:13 PM
    Silver Member
    Join Date: Jan 2008
    Posts: 170
    I put the serial in on a site and it came up with 70 but doesn't explain how hte pre 64 stock fit or why my gunsmith thought it was a pre 64 hmm
    Reply With Quote
    Unread 01-15-2008, 12:13 AM
    Bronze Member
    Join Date: Nov 2006
    Location: Texas
    Posts: 74
    Pre 64

    The guys are right on on their prices, however did I read right that the stock is not original? If you do not have the original stock in good shape, those prices come down alot. Probably around 500-600 or so if that in most cases.
    If you have the original stock for it I would consider wrapping it with either a gunsock or keep it in a gun case with some humidity removers thrown in to stop warping, Being that it is not on the gun. I have seen old factory stocks stored in a safe, that the forend would warp toward the barrel groove and can make it difficult to reinstall the barrel, this was a rare case, but would hate to see it happen again.
    Hope this helps
    Ballistically Speaking, Im about a 300 FP with a BC of -1.
    Reply With Quote


    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 07:30 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC