Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Gun Refinishing

LinkBack Thread Tools Display Modes
Unread 03-17-2009, 08:59 PM
Bronze Member
Join Date: Jan 2008
Location: Florida
Posts: 36
Gun Refinishing

Was just looking for some opinions on refinishing the metal on my rifle. I've been looking at a cerakote or duracoat finish. Gun is parkerized now but getting pretty worn. I also would like to make it green but don't want to paint this one. Just curious to hear what others are using or have had good or bad luck with.
Reply With Quote

Unread 06-05-2009, 11:26 AM
Silver Member
Join Date: May 2005
Location: Southern Michigan
Posts: 132
Re: Gun Refinishing

Cerakote in my opinion is tough to beat when applied correctly.
Eddie Fosnaugh
Reply With Quote
Unread 06-05-2009, 11:48 AM
Bronze Member
Join Date: Nov 2008
Location: east texas
Posts: 43
Re: Gun Refinishing

I have used dura coat on several of my own and others rifles, shotguns, and pistols. It is very easy to use and holds up well. It also comes in many colors including green. The best thing is you do not have to bake it on. I do not know if you have ever tried putting a barreled action in an oven but it does not fit to well.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Gun Refinishing
Thread Thread Starter Forum Replies Last Post
Scope refinishing drespecki Gunsmithing 0 04-27-2011 03:56 PM
refinishing tikka walnut grampyg Gunsmithing 2 12-22-2010 07:02 PM
refinishing a savage action justgoharder Gunsmithing 6 06-08-2009 02:13 PM
Refinishing a Lam Stock Frank7mm Gunsmithing 8 09-07-2008 11:23 PM
refinishing lam. stock boomhand Gunsmithing 6 01-19-2008 03:33 PM

All times are GMT -5. The time now is 04:00 AM.

All content ©2010-2015 Long Range Hunting, LLC