Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Good Brass for 300 RUM

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-26-2003, 11:39 AM
Junior Member
 
Join Date: Sep 2002
Posts: 14
Good Brass for 300 RUM

First, is there any decent brass available for the 300 RUM or the 404 Jeffery?

I was thinking of using 404 brass so I could have thicker necks then turning the necks to have uniform necks that work well in a standard chamber. I realize I must turn the head also. I am sure some of you have tried this and would like to hear your thoughts.

I am planning to rebarrel and really don't want a tight neck chamber, but I will get one if that is the best choice with the brass available.

Thanks, David
Reply With Quote
  #2  
Old 02-26-2003, 01:49 PM
Platinum Member
 
Join Date: May 2001
Location: Lock Haven P.A.
Posts: 1,071
Re: Good Brass for 300 RUM

There is nothing wrong with the Rem Ultra Mag brass... [img]images/icons/smile.gif[/img]
__________________
Boyd Heaton...
EAGLE VALLEY OFFROADERS CENTRAL,PA
Reply With Quote
  #3  
Old 02-26-2003, 02:25 PM
Platinum Member
 
Join Date: Jun 2001
Location: Palmer, Alaska
Posts: 2,539
Re: Good Brass for 300 RUM

I have never used any, but RWS makes 404 brass I believe. If I was set on using it, I would open the bolt face and be done with it, but in my experience with the Remington Ultra brass, it has very consistant internal capacity, even though the brass may weigh 2-4gr different.

If you chamber to a "tighter" than SAAMI neck, you still will not have to turn necks, but could if you want and still keep your brass from excessive working, that is what my father did with his 300wsm.

If you are going to turn the necks anyway, I would get the tight neck with .002" total clearance anyway, brass will last alot longer and you could realize better accuracy this way, just MHO. [img]images/icons/smile.gif[/img]
__________________
Brent Moffitt
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Good Brass for 300 RUM
Thread Thread Starter Forum Replies Last Post
Who makes good brass for the 7mm rem mag? 188MULE Reloading 12 01-26-2010 12:08 AM
Good 25-06 brass? goose Reloading 9 11-17-2009 07:10 PM
Good brass for 300 win mag? hillajam Reloading 25 03-07-2007 08:26 AM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM
Brass still good to go ? Jimm Reloading 7 06-08-2006 08:02 PM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 08:24 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC