Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Firer lapping vs. standard barrel break in?

 
LinkBack Thread Tools Display Modes
  #15  
Old 01-10-2007, 10:46 AM
Platinum Member
 
Join Date: Jul 2004
Location: Texas
Posts: 5,627
Re: Firer lapping vs. standard barrel break in?

Aileron 737

I'm just going to add to the confusion but hear goes.

I recomend using the barrel mfg, recomended breakin procedure first then if it fowls badly or doesent
shoot well then make the decision to lap or Fire
lap.

Factory barrels are normally rough but not all are
so shoot first. They normally take 30 to 50 rounds
to break in.

Custom barrels take 10 to 25 shots depending on the manufacture( some lap and some dont)

Using FF may not be nessary and can only shorten
barrel life.

Just an opinion [img]/ubbthreads/images/graemlins/smile.gif[/img]

J E CUSTOM
__________________
"PRESS ON"
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Firer lapping vs. standard barrel break in?
Thread Thread Starter Forum Replies Last Post
Lapping a Barrel? kc Gunsmithing 14 06-09-2011 07:32 AM
Hand lapping vs. fire lapping vs. traditional barrel break in .260 Rem Rifles, Bullets, Barrels & Ballistics 3 02-25-2011 11:08 AM
Barrel Lapping whopperstopper Rifles, Bullets, Barrels & Ballistics 5 10-12-2010 07:14 AM
Barrel Lapping Compounds J E Custom Gunsmithing 7 07-01-2007 08:31 AM
Locking lug lapping & lapping compound recomendations NorthernSniper Rifles, Bullets, Barrels & Ballistics 3 07-13-2006 05:50 PM


All times are GMT -5. The time now is 08:55 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC