close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Exbal version 9.6 ?

LinkBack Thread Tools Display Modes
  #1  
Unread 10-02-2013, 02:32 PM
Silver Member
 
Join Date: Dec 2001
Location: bluefield,va,us
Posts: 337
Exbal version 9.6 ?

Your sight in conditions are set but how do you use different conditions for the hunt in the program ? Can you do that without having to re chronograph the ammo at the hunt location ?

Thanks,Keith
__________________
keith
Reply With Quote
  •   #2  
    Unread 10-02-2013, 05:56 PM
    Platinum Member
     
    Join Date: Aug 2003
    Location: NC, oceanfront
    Posts: 4,021
    Re: Exbal version 9.6 ?

    With sight in conditions set and "Same as field conditions" block unchecked, you just enter air density differences in the field and velocity diffs if known. But it's not practical to re-chrono on a hunt.
    You would determine this throughout the year with varying/expected temps, and keep a log on it.

    I used to use software in the field but have conceded to focusing on Hunting/Stalking. It's just more enjoyable to me for groundhogs.
    With this I set my limits to ~500 or ~600yds depending on gun, and can cover everything here with preps throughout the year leading to a single click-card I carry in my back pocket for hunts.
    But then, I always know where & when I'm going to hunt, and what my MV & conditions will be.
    Hay season, 1250ft, laser ranged, 5-10mph winds & up to 10deg slope..
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 10:39 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC