Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Does anyone make Long Range SOLIDS in a heavy weight .338 cal.....

 
LinkBack Thread Tools Display Modes
  #15  
Old 05-29-2009, 01:09 PM
Silver Member
 
Join Date: Mar 2009
Posts: 214
Re: Does anyone make Long Range SOLIDS in a heavy weight .338 cal.....

JM,

There is a website in the preparation stage.

I am holding off from activating it until designs are finalized, and patent protections are in place. Zethilius Associates is involved in much more than projectile design, in fact we started out with a completely different focus centering around high temperature/pressure barrel, and case configurations, capable of withstanding RDX/HMX based propellants.

If you would like to get a look at some bullet prototypes, Sniper's Hide has some threads which contain early photographs, and test reports.

Best,
Noel
Reply With Quote
  #16  
Old 05-29-2009, 01:23 PM
Platinum Member
 
Join Date: Feb 2008
Location: Wampum, PA
Posts: 1,513
Re: Does anyone make Long Range SOLIDS in a heavy weight .338 cal.....

Thanks Noel! I'll check it out!
__________________
"I may be dumb, but I'm not stupid." - Terry Bradshaw
Reply With Quote
  #17  
Old 06-02-2009, 03:57 PM
Silver Member
 
Join Date: Mar 2009
Posts: 214
Re: Does anyone make Long Range SOLIDS in a heavy weight .338 cal.....

It looks as though I am going to have to correct some comments I made about the 6.0 caliber ZA338.

Some ideas which I have been toying with over the past few days, to exceed the 300 grain Scenar's BC in a magazine compatible copper engraving-band solid, coalesced into a design revision which I am certain will surpass the Lapua... and do so with ~26 fewer grains than the hammer.

The new projectile is more stable than the preceeding version, and will easily function at MV's over 3,000 fps from an exit-twist between 9.0-9.5".

The price will still be the same. Anyone who is interested, and willing to sign an NDA can contact me at nlclsn@aol.com.

Best,
Noel
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Does anyone make Long Range SOLIDS in a heavy weight .338 cal.....
Thread Thread Starter Forum Replies Last Post
Will the Tikka T-3 make a good long range rifle? WEATHERBY460 Rifles, Bullets, Barrels and Ballistics 6 04-30-2011 10:13 AM
make a long range hunting rifle bob1257 Long Range Hunting & Shooting 7 12-04-2010 06:33 PM
Help me make sure I understand my 6.5 long range hunting choices correctly.... cdherman Rifles, Bullets, Barrels and Ballistics 6 07-06-2010 07:14 AM
long range heavy gun varminter heavy hitting 300 Long Range Hunting & Shooting 1 06-29-2010 07:17 PM
is it worth it to make a long range hunting rifle from a model 70 30-06 nathank Gun Parts - Stocks, Barrels, Actions, etc. 7 12-25-2008 08:07 PM

Current Poll
Do you archery hunt for elk?
YES - 32.12%
62 Votes
NO - 52.33%
101 Votes
Not yet, but I plan to. - 15.54%
30 Votes
Total Votes: 193
You may not vote on this poll.

All times are GMT -5. The time now is 03:19 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC