Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Different magazine follower for Win70 rebarreled to 300 Wby?

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-20-2005, 06:35 PM
Platinum Member
 
Join Date: Jul 2004
Location: SW MO
Posts: 1,173
Different magazine follower for Win70 rebarreled to 300 Wby?

This is probably a question for fiftydriver, but I'll take advice from anyone in the know. I've got a win 70 338WM that I'm going to get rebarreled to 300 Wby (factory takeoff barrel). The internal magazine is already on the short side for the 338. It looks like a different box and follower could be put in to accomodate the longer round. I think that winchester has only one length of long action, so the bolt throw should be long enough. By the way, this is a controlled feed if it matters. Thanks! Sam
__________________
Lefties are the only ones in their right minds!
(and I ain't talkin' politics!)

NRA Life Member
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Different magazine follower for Win70 rebarreled to 300 Wby?
Thread Thread Starter Forum Replies Last Post
WTB Remington adl sa 308 magazine/spring/follower huntfish Gun Parts - Stocks, Barrels, Actions, etc. 3 01-13-2011 11:07 AM
Magazine Box, Follower and Spring Doug in Alaska Gunsmithing 2 03-12-2010 10:21 PM
WTB Win 70 magazine and follower montana_native Gun Parts - Stocks, Barrels, Actions, etc. 0 01-02-2010 10:35 AM
Center feed magazine box & flat follower for WSM's 270yotekiller Long Range Hunting & Shooting 2 11-01-2006 08:59 AM
Benchrest Magazine Follower Questions(s) royinidaho The Basics, Starting Out 4 02-17-2006 07:53 PM


All times are GMT -5. The time now is 08:57 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC