Re: Cutting Edge Projos
Fouling dont seem to be a problem. I usually clean with KG-12 every 25-30 rds. The BMG loads I posted are not overpresure and I have loaded the same brass up to 15 times. The US 869 loads are on the warm side and the brass gets a little sticky after 5 or six loadings. I havent seen any unexplained pressure spikes with either load. US 869 dont seem to get consistant until the pressure reaches the upper limits. I really like the BMG load, extraction is effortless and the brass life is very good. ES usually runs in the single digits.