Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Customizing CZ Rifles

 
LinkBack Thread Tools Display Modes
  #1  
Old 10-28-2009, 12:31 PM
Platinum Member
 
Join Date: Mar 2008
Location: SW Idaho
Posts: 1,148
Customizing CZ Rifles

I have a buddy that has a couple very nice CZ rifles that are really good shooters in their stock form. He wants to get rid of them for a very good price but I am curious about how they are to work on if I wanted to customize them with new barrels, bedding, bolt face work, accurizing type mods, etc. How are they when it comes to setting them up for true long range work?

Any info would be appreciated.

Scot E.
Reply With Quote
  #2  
Old 10-30-2009, 10:52 PM
Platinum Member
 
Join Date: Mar 2008
Location: SW Idaho
Posts: 1,148
Re: Customizing CZ Rifles

Nobody's played with the CZ's huh? I have been so impressed with their stock guns I figured someone would have seen what could be squeezed out of them.
Reply With Quote
  #3  
Old 10-31-2009, 01:08 AM
Platinum Member
 
Join Date: Mar 2005
Location: Utah
Posts: 1,377
Re: Customizing CZ Rifles

Scot,
I've a little experience. I've done two. I built a custom 260 on one (with my own hands), and trued, bedded, and tuned the trigger on another.

As a hunter / shooter I was happy with my CZ's. Lot of nice feaures, good accuracy, for a great price. As for working on them, they are something of a pain. Typical accurizing steps will be no big deal. Not slick like a Rem, but no big deal.

Only custom components I used were barrels. I'd make sure you can even find any aftermarket components you want. Acton threads are metric and very coarse. Make sure your smith will cut them. Straight Shot Gunsmithing will.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Customizing CZ Rifles
Thread Thread Starter Forum Replies Last Post
Customizing a Tikka T3 Connor Long Range Hunting & Shooting 4 05-11-2010 03:32 AM
Very basic about customizing a rifle hound_hunter The Basics, Starting Out 4 03-15-2010 07:31 PM
best website for customizing a rem model 700? nathank Rifles, Bullets, Barrels and Ballistics 2 04-28-2009 01:20 AM
Customizing a Ruger #1 7ultra Equipment Discussions 2 11-09-2004 08:49 AM
Customizing a Rem 25.06 Obsessed The Basics, Starting Out 1 01-06-2003 07:04 PM

Current Poll
Spot & Stalk or Ambush For Western Deer?
MOSTLY - Spot & Stalk - 73.77%
1,021 Vote
MOSTLY - Ambush - 26.23%
363 Votes
Total Votes: 1,384
You may not vote on this poll.

All times are GMT -5. The time now is 01:17 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC