close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

custom sizing dies/ Redding or?

LinkBack Thread Tools Display Modes
  #8  
Unread 10-31-2002, 05:09 PM
Writers Guild
 
Join Date: Jul 2001
Posts: 1,459
Re: custom sizing dies/ Redding or?

A sizing die that I have had a lot of success with is the Lee Collet neck sizing die. They will make a custom die set for $50. Just send them a couple of cases and a bullet. Set does not include a FL sizer but in a bench gun probably not needed.

Good luck...

Jerry
Reply With Quote
  •   #9  
    Unread 10-31-2002, 08:25 PM
    Silver Member
     
    Join Date: Jun 2001
    Location: N. Dakota
    Posts: 181
    Re: custom sizing dies/ Redding or?

    Frankenstien, Bet your busy tonite... [img]images/icons/grin.gif[/img]

    I "share" a redding Comp Neck & Comp seating die with a shooting buddy. The sleeve inside these dies are not hardened. I had them reamed out by my smith without any issues... I contacted Pat Ryan at Redding in regards to this so I could assure my smith that he wouldn't wreak his reamer..

    I don't have their catalog to refer to, but
    if you have any doubts, give Redding a call..
    [img]images/icons/cool.gif[/img] They'll listen to ya...

    Nodak

    [ 10-31-2002: Message edited by: Nodak7mm ]
    __________________
    Nodak7mm

    Member #92
    Reply With Quote

      #10  
    Unread 11-01-2002, 09:25 PM
     
    Posts: n/a
    Re: custom sizing dies/ Redding or?

    frankenstein i shoot ibs 1000yd with 65-06 imp i use wilson neck die, wilson micro -seater and a neil jones body die its no cheap at around 250.00 but it is the best there is you have to send neil 3peices of fired brass do not size just send it right out of the gun thats how he gets a chamber match. you will see better loads & better groups. [img]images/icons/cool.gif[/img]
    Reply With Quote
      #11  
    Unread 11-01-2002, 09:27 PM
     
    Posts: n/a
    Re: custom sizing dies/ Redding or?

    frankenstein i shoot ibs 1000yd with 65-06 imp i use wilson neck die, wilson micro -seater and a neil jones body die its not cheap at around 250.00 but it is the best there is you have to send neil 3peices of fired brass do not size just send it right out of the gun thats how he gets a chamber match. you will see better loads & better groups. [img]images/icons/cool.gif[/img]
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: custom sizing dies/ Redding or?
    Thread Thread Starter Forum Replies Last Post
    Custom Rem 700 bbl in .35 Whelen Ackley, plus Redding Dies, 200 brass & 432 bullets edward hogan Gun Parts - Stocks, Barrels, Actions, etc. 4 12-14-2009 08:27 PM
    Lee Collet die or Redding bushing die for best neck sizing? drenge Reloading 12 10-17-2008 05:07 PM
    Problems setting Redding full-length sizing die G22inSC Reloading 4 08-13-2008 07:57 AM
    custom chambers and sizing dies American_pride Rifles, Bullets, Barrels & Ballistics 3 05-05-2008 03:52 PM
    .243 AI and Redding comp. neck sizing dies Jimm Reloading 19 06-22-2005 07:11 PM


    All times are GMT -5. The time now is 11:41 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC