Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Copper In Throat

LinkBack Thread Tools Display Modes
Unread 06-23-2003, 09:55 PM
Bronze Member
Join Date: May 2002
Location: N/A
Posts: 64
Re: Copper In Throat

Again gentlemen, thanks for the replies. I will use J.B.'s in the throat area with a few passes through the lenght of the bore. I have the J.B.'s Brite Bore, it says it is a bore finishing compound. To use after the bore is cleaned. I suppose that will polish the throat area. If this isn't the right type of J.B.'s let me know. Thanks!
Shoot Safe, Shoot Straight..RiverRat
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Copper In Throat
Thread Thread Starter Forum Replies Last Post
Get the copper out! Ksmirk Rifles, Bullets, Barrels & Ballistics 29 01-14-2011 10:04 PM
copper gas checks 9.3mm dougedwards Reloading 0 02-16-2009 12:18 PM
Can't seem to get the copper out. RockyMtnMT Rifles, Bullets, Barrels & Ballistics 25 01-22-2009 06:05 PM
Copper 22 Hornet Nathanial Guns For Sale 1 05-05-2005 05:49 PM
Copper in the 300 RUM Alucard Rifles, Bullets, Barrels & Ballistics 11 04-07-2005 08:58 AM

All times are GMT -5. The time now is 04:06 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC