Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Converting 300 rum into 338 edge

LinkBack Thread Tools Display Modes
Unread 03-27-2010, 01:03 PM
Silver Member
Join Date: Sep 2008
Location: Virginia
Posts: 305
Re: Converting 300 rum into 338 edge

Originally Posted by kiwi3006 View Post
If it is a button rifled barrel or a hammer forged you will not be able to ream the barrel out to .338.
A cut rifled barrel can be done, see Michael Eichele's article

I would imagine a factory 700 P will be hammer or button rifled.


I know my Sendero came Hammered.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Converting 300 rum into 338 edge
Thread Thread Starter Forum Replies Last Post
converting rem 700 300 win mag to 7mm ultra mag blackwidow Gunsmithing 5 06-26-2011 09:45 PM
Converting a .338 RUM to edge LjMann22 Rifles, Bullets, Barrels & Ballistics 8 04-27-2011 12:27 PM
Converting 22-250 to DBM kfrye Gunsmithing 0 04-30-2008 08:16 PM
converting a .30-.378 to a .338-.378 Laker_Taker Rifles, Bullets, Barrels & Ballistics 5 04-20-2006 02:35 PM
Converting Billy Rainmaker The Basics, Starting Out 3 08-14-2003 01:52 PM

All times are GMT -5. The time now is 02:23 PM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC