Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Chronograph protection

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-10-2009, 11:15 PM
Platinum Member
 
Join Date: Nov 2008
Posts: 1,063
Chronograph protection

I have read a few threads where people have show concerns for the health and welfare of their chronograph while shooting over them. This is with some justification.

I can remember when a few years ago my local deer hunting club purchased a new chronograph for our members to use to test their loads with. Well the first shot that was fired over it was with a .300 win mag loaded with slow powder with large granules. The shot was from about two feet.

At the shot, muzzle blast shot one of these large granules straight through the LED display and destroyed the readout. The chronograph was stuffed!

When I purchased a chronograph I didn’t want the same thing to happen to mine so I built a solid steel protector for the delicate device that had cost me some good dollars.

The protector consists of a steel channel with a half inch steel plate welded onto it at an angle of about 15 degrees. Strong support webbing was added and then I fired a .338 win mag into it from a distance of about 10 feet. (See the impact mark in the photo).

This worked quite well and the projectile deflected off into the blue for parts unknown with out any significant damage to the steel plate. (I did test it in a safe place). I now have confidence when testing my loads that no damage to my chronograph can take place.

To see the readout you do have to walk up to the chronograph and peek over the rim of the front plate. This is a bit of a pain but I can put up with this in order to ensure the survival of my chronograph.

Further improvements to the protector include paint marks on the slopping section of the protector to proper align the cross hair with the sensors on the chronograph. Another improvement was to add a Perspex cover over the chronograph that was painted with a thin layer of matt white paint to simulate a bright cloudy day which is best for chronograph readings with smaller bullets.

One of the advantages of this device is that I now have the confidence to set it up at 300 yards and fire some shots over it which is something that I would not be game to do with a bare unprotected chronograph. This gives some good data when checking bullet B.C.s etc. Cost of the project was only a few dollars and it took about 3 hours to make. This device has seen about 5 years service now and I am very happy with it.…………..Topshot.

__________________
scientia est potentia
Reply With Quote
  #2  
Old 02-11-2009, 02:37 AM
Silver Member
 
Join Date: Jul 2005
Location: Juneau, Alaska
Posts: 213
Re: Chronograph protection

Chronographs have a dangerous job. Looks good but have to know where the ricochet will fly.

Festus
__________________
"Fenced yards ain't hole cards and like as not never will be, reason for rhymers and old five and dimers like me."
Willie Nelson
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Chronograph protection
Thread Thread Starter Forum Replies Last Post
Hearing Protection What do you use? blipelt Equipment Discussions 2 04-03-2010 11:05 PM
Millennium Chronograph Versus Pact MK IV Timer & Chronograph Eaglet General Discussion 10 03-31-2010 11:28 PM
Ear Protection skandlus Long Range Hunting & Shooting 8 12-09-2009 09:48 PM
EAR PROTECTION? preacherman General Discussion 4 01-03-2006 08:37 AM
Hearing Protection Ian M General Discussion 1 03-22-2004 05:04 AM


All times are GMT -5. The time now is 02:37 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC