close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Bullpup

LinkBack Thread Tools Display Modes
  #1  
Unread 01-26-2005, 07:34 AM
Bronze Member
 
Join Date: Dec 2004
Location: Memphis,Tn
Posts: 76
Bullpup

I'm throwing this one out to the dogs! What do you think of a bullpup for a longrange gun,(pros:cons)?? I'm looking at my long,heavy mod 700 action,and the light came on.
Reply With Quote
  •   #2  
    Unread 01-26-2005, 07:44 AM
    Gold Member
     
    Join Date: Mar 2004
    Location: Germany
    Posts: 658
    Re: Bullpup

    There are a few bulpup bolt guns about. Ive seen some made in france. There is a repeater here in germany that works by the shooter cycling the action by pulling the pistol grip back wards.
    you should be able to come up with something on a searhc engine..
    pete
    __________________
    Occupying the British Zone. www.roedaleprecision.com
    www.roedale-psg.de
    Reply With Quote

      #3  
    Unread 01-26-2005, 09:01 AM
    Sponsor
     
    Join Date: Jun 2007
    Location: North Idaho
    Posts: 1,878
    Re: Bullpup

    Just so you know I am working on a bullpup based on a Remington 700 with a 30" tube and a 42" oal. I will post it here when I am finished.
    __________________
    Shawn Carlock

    www.defensiveedge.net
    1-208-687-2659
    Reply With Quote
      #4  
    Unread 01-26-2005, 12:41 PM
    Silver Member
     
    Join Date: Nov 2003
    Location: DFW Texas
    Posts: 155
    Re: Bullpup

    Shawn...any concern for the shooter having his face over the chamber. I mean, i know failures are rare but I just would feel nervous with my face right there at the expansion point.

    Will you have ideas in place to port the gases etc away from a shooter's face?

    Kyle
    Reply With Quote
      #5  
    Unread 01-29-2005, 10:31 PM
    Bronze Member
     
    Join Date: Dec 2004
    Location: Memphis,Tn
    Posts: 76
    Re: Bullpup

    Do you mean muzzel blast or chamber?I feel what i had in mind is safer because you have one more piece of metal between you and the whole thing.I was gonna build one for my 50bmg,with 27 lb of barrel it seamed like a good idea to put it on my shoulder,not in front. Once you solve a problem,all the fun is over.
    Reply With Quote
      #6  
    Unread 01-30-2005, 08:45 AM
    Sponsor
     
    Join Date: Jun 2007
    Location: North Idaho
    Posts: 1,878
    Re: Bullpup

    There will be an adjustable cheek piece that will help to shield you from gas, brass, etc. in the event of a ruptured case. I also vent the bolt body into the magazine box. In the event of an extreame failure (blow up) I am not sure it will matter much if your face is over the action with a cheekpiece shield or right in back of it with nothing. It was one of the first things that I thought about. Mine would be described best as a modular partial tube design.
    __________________
    Shawn Carlock

    www.defensiveedge.net
    1-208-687-2659
    Reply With Quote
      #7  
    Unread 01-30-2005, 11:35 AM
    Bronze Member
     
    Join Date: Dec 2004
    Location: Memphis,Tn
    Posts: 76
    Re: Bullpup

    I know what you mean,1 1/2x3inch tubing,it conseals everything.Also mine will sit on your shoulder,not in front.It will work great for breaks also,just mack the frame longer than the barrel or the same,and it will deflect ALL the gases away(conceled in the frame,muzzel end open).Also both grips will be at 45 of center line.As long as i'm doing it,it will fit right not like ones made.It's like everything else today,as long as it looks good someone will buy it.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Bullpup
    Thread Thread Starter Forum Replies Last Post
    Bushmaster bullpup overgunned Guns For Sale 1 08-24-2009 09:20 AM
    338/300 RUM Bullpup - Posted for Dave Wilson royinidaho Equipment Discussions 39 01-02-2008 11:53 PM
    Bullpup thocon General Discussion 0 01-26-2005 07:34 AM


    All times are GMT -5. The time now is 01:31 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC