Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Bullet Advice

LinkBack Thread Tools Display Modes
Unread 11-14-2010, 03:53 PM
Silver Member
Join Date: Jan 2005
Location: Northern Virginia
Posts: 308
Re: Bullet Advice

FWIW I use 165gr SST in my 308 for deer and have a similar load for Interbonds the BC for each is identical though I don't think the ogive is the same. Interbonds are at least as tough as Accubonds IMO and almost interchangeable with the SST. Check out the 18gr SSTs and Interbonds if you want a deer load and a similar load for elk and bigger critters. This season I have a load in 165 with both but next season ill have 180 loads for Amax , SST and Interbonds...

Matt Roth
Reply With Quote
  •   #16  
    Unread 11-14-2010, 09:23 PM
    Platinum Member
    Join Date: Dec 2008
    Location: rathdrum, id.
    Posts: 4,998
    Re: Bullet Advice

    +1 on the sst not being an elk bullet. I've had the 180's blow up in mid air when Fired above 3400' with my ultra.......Rich
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: Bullet Advice
    Thread Thread Starter Forum Replies Last Post
    advice on 204 bullet weight backyardsniper Rifles, Bullets, Barrels & Ballistics 4 12-28-2010 07:36 PM
    Advice on 6mm bullet for Muleys and Hogs... fireroad Rifles, Bullets, Barrels & Ballistics 14 07-20-2010 11:29 PM
    Need advice on 1000 yard bullet for .308 Matt_G Long Range Competition 12 07-26-2009 05:31 PM
    Need Bullet Advice (.308) hypno Rifles, Bullets, Barrels & Ballistics 10 11-30-2008 11:10 PM
    Need some Bullet Advice for Elk dakor Rifles, Bullets, Barrels & Ballistics 60 09-26-2005 10:48 PM

    All times are GMT -5. The time now is 03:58 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC