Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Building a 338

 
LinkBack Thread Tools Display Modes
  #8  
Old 08-29-2011, 10:20 AM
Platinum Member
 
Join Date: Apr 2010
Location: Allen, TX
Posts: 2,608
Re: Building a 338

Quote:
Originally Posted by GNERGY View Post
338 ULTRA MAG & 225gr. BARNES RESULTS

Here are some of the results you can get using a Broughton tube. I am more than happy with it. It just shoots like a Laser.
Tarey
Tarey,

Have you tried any of the 300gr bullets in your 338 RUM?

I like the option of factory ammo without the extra cost of the LM.

thanks,
richard
Reply With Quote
  #9  
Old 08-29-2011, 11:13 AM
GNERGY
 
Posts: n/a
Re: Building a 338

No, I never tried anything heavier than the nosler 250 ab. From what I have read from Long Time Long Ranger he said the 225gr will get there flatter and still have the punch to do what I need out to 1000 yds.
Tarey
Reply With Quote
  #10  
Old 08-29-2011, 04:19 PM
Bronze Member
 
Join Date: Aug 2009
Posts: 69
Re: Building a 338

Sorry to be asking a dumb question, but I've never heard of the edge +p. I'm assuming it's just the .338 edge run at higher presure. Is it a special chamber? How much faster is it? From what I've read is most edge loads shoot best near the same velocity as the Rum. I'd love to know more?
Reply With Quote
  #11  
Old 08-29-2011, 05:56 PM
Banned
 
Join Date: Jul 2007
Location: Idaho
Posts: 366
Re: Building a 338

There is an article that is written by Carlock on the 338 plus P
In this in Froum: Long Range Hunting and Shooting dated 08/27/2011.
Speaks a little about it there.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Building a 338
Thread Thread Starter Forum Replies Last Post
Building a 338 RUM cumminsusa Rifles, Bullets, Barrels & Ballistics 29 08-31-2010 05:13 PM
Building a 250 A.I. BCinKS Rifles, Bullets, Barrels & Ballistics 0 09-03-2008 04:33 PM
Building 240 Wby ddgo Rifles, Bullets, Barrels & Ballistics 11 02-01-2008 06:52 AM
Building a 6-.284 Naymola Rifles, Bullets, Barrels & Ballistics 8 05-25-2007 06:44 PM
If you were building a 300 WSM.... ATH Rifles, Bullets, Barrels & Ballistics 9 12-26-2005 11:54 AM


All times are GMT -5. The time now is 03:19 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC