Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Brass for 300 win.

 
LinkBack Thread Tools Display Modes
  #1  
Old 05-17-2002, 04:06 PM
Junior Member
 
Join Date: Dec 2001
Location: vancouver, b.c.
Posts: 11
Brass for 300 win.

Hi Guys, which brass manufacture has the best brass and most case volume for the 300 win.,I like my loads hot so, I need the brass that has the best case life at near max. Thanks for any help [img]images/icons/smile.gif[/img]
Reply With Quote
  #2  
Old 05-18-2002, 03:16 PM
 
Posts: n/a
Re: Brass for 300 win.

BC shooter,
Win 300 mag is a very strong casing, it shouldn't really matter to much as to the brand. I do belive tho that the Federal might be the heaviest casing, at least this has been my experience with the 300 and 7mm. But then you might not get as high of velocity with the heavier case than you could with the lightier one, being, pressure will climb quickier with a given load. Just like milatary brass is heavier. Trial & Error.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Brass for 300 win.
Thread Thread Starter Forum Replies Last Post
338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels and Ballistics 6 02-29-2012 11:43 PM
Group differences in Weatherby Brass versus new Norma Brass TX mountain hunter Long Range Hunting & Shooting 5 12-29-2010 10:17 PM
25-06 reloading dies, brass, and bullets / 45ACP brass jeffro Reloading Equipment and Components 1 05-01-2010 10:51 AM
338 Edge, Brass life test. Rem 300RUM brass AJ Peacock Reloading 15 12-30-2009 12:26 PM
Nosler Brass cosmetic seconds good brass? sambo3006 Reloading 6 01-04-2007 08:57 PM


All times are GMT -5. The time now is 03:12 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC