close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

bedding

LinkBack Thread Tools Display Modes
  #1  
Unread 02-20-2002, 03:48 PM
Junior Member
 
Join Date: Feb 2002
Posts: 24
bedding

I will recieve a new stock for my 300 RUM in aprox. 2wks. I was thinking about using a barrel bedding block instead of action bedding. I would like some opinions on this from all you smart longgg shootin guy if you don't mind.
I used it mainly for longrange varminting. It has a 30" Hart 1.250 dia. It is bedded in an itty bitty stock now. The new stock will have the room to barrel bed.
Thank you.
Reply With Quote
  • Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: bedding
    Thread Thread Starter Forum Replies Last Post
    Action bedding & Pillar bedding mkbaquet The Basics, Starting Out 5 04-30-2016 10:38 AM
    Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
    Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
    Is a bedding block better than pilar bedding pdbsa The Basics, Starting Out 8 06-20-2006 08:37 AM
    Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM


    All times are GMT -5. The time now is 11:56 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC