  | Barrel Twist Rate |

09-30-2009, 01:36 PM
|
|
Silver Member
|
|
Join Date: Jan 2008
Location: new jersey
Posts: 137
|
|
|
Barrel Twist Rate
Hey Fellars, What barrel twist is best for .300 mag.,using 180-200gr. bullets? Thanks, Dskiper
|

09-30-2009, 02:41 PM
|
|
Platinum Member
|
|
Join Date: Jun 2007
Location: Fredericksburg VA
Posts: 3,844
|
|
|
Re: Barrel Twist Rate
Most will say 1-10, but you can also run the 1-11 quite easily also. That is the go to twist for the WSMs with 210s so sure the win mag will run them also.
BH
|

09-30-2009, 08:30 PM
|
|
Platinum Member
|
|
Join Date: Jan 2008
Location: Falls Church, VA
Posts: 2,727
|
|
|
Re: Barrel Twist Rate
10 or 11....either would probably serve you well.
__________________
I'm not gonna shoot here. I'm gonna shoot waaaaaaaay over there!
|

09-30-2009, 09:03 PM
|
|
Platinum Member
|
|
Join Date: Dec 2008
Location: Northern Id.
Posts: 2,619
|
|
|
Re: Barrel Twist Rate
If you are sure you will never want to shoot heavier than 200, I would go with the 11. Chance for accuracy is better.......Rich
|

10-01-2009, 04:13 AM
|
|
Gold Member
|
|
Join Date: Dec 2001
Posts: 659
|
|
|
Re: Barrel Twist Rate
I've never shot a 200gr bullet out of 1/11 twist barrel so cann't say how the velocity compares to the 1/10 twist barrels. Years ago build a 30-338mag (338mag case) used a 1/12 twist barrel just to shoot the 165gr bullets later had another one build used a 1/10 twist barrel for the 180/200gr bullets.
Had a 30-06 with 1/10 Kreiger barrel and it was alittle faster than the 1/11 twist barrels (Lilja/Bartlein) using the same loads 180gr bullets and the 1/11 twist were faster with 165/168gr bullets.
I'm always playing around with twist myself I'd use a 1/10 twist for the 180/200gr bullets. Well good luck
|

10-01-2009, 05:34 AM
|
|
Platinum Member
|
|
Join Date: Feb 2008
Location: IOWA
Posts: 1,762
|
|
|
Re: Barrel Twist Rate
1:10 twist
|
  |
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Similar Threads for: Barrel Twist Rate
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
What barrel /twist rate for your .338 edge?
|
bigbuck |
Rifles, Bullets, Barrels and Ballistics |
7 |
09-21-2009 09:08 PM |
|
25-06 barrel length and twist rate
|
Tarfur |
Rifles, Bullets, Barrels and Ballistics |
2 |
04-11-2006 03:19 PM |
|
Barrel twist rate?
|
ErikD |
Rifles, Bullets, Barrels and Ballistics |
2 |
02-04-2006 11:46 AM |
|
Twist rate for my new 7mm Krieger barrel
|
krumbum |
Rifles, Bullets, Barrels and Ballistics |
6 |
02-25-2005 08:24 AM |
|
338 lapua barrel length and twist rate
|
mbigley |
Rifles, Bullets, Barrels and Ballistics |
1 |
03-28-2002 08:56 PM |
|
|
All times are GMT -5. The time now is 02:06 AM.