Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Barrel Tuner and Accurizer

LinkBack Thread Tools Display Modes
Unread 02-08-2006, 02:04 PM
Bronze Member
Join Date: Feb 2002
Location: Saginaw
Posts: 80
Re: Barrel Tuner and Accurizer

I've got a Brownings A-Bolt in 7MM mag that came with a BOSS. There's no doubt in my mind that it works. I'd work with my loads to a 1/2" 3 shot goup, and then use the BOSS to fine tune the load. Once the BOSS was set properly the groups would be as advertised. I'd get 2 bullets into the same hole, third bullet would figure "8" the group to a low 2, as in .2". Some bullets were tougher than others to tune, but everything I shot thru that rifle showed an improvment when working with the BOSS. YMMV.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Barrel Tuner and Accurizer
Thread Thread Starter Forum Replies Last Post
ruger #1 and hicks accurizer Wildhog Rifles, Bullets, Barrels & Ballistics 2 09-17-2010 01:10 PM
which break, barrel length, barrel cotour, and twist? nathank Rifles, Bullets, Barrels & Ballistics 1 02-03-2009 08:31 PM
Heath Robinson (half ass) barrel tuner ds General Discussion 4 12-28-2006 07:22 PM
bell and carlson accurizer Jimm Rifles, Bullets, Barrels & Ballistics 1 03-15-2005 09:05 PM
Hicks accurizer? Rifles, Bullets, Barrels & Ballistics 5 01-30-2005 10:05 AM

All times are GMT -5. The time now is 12:53 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC