Originally Posted by Broz
I have been all the way out to 300 with zero's. I am now back to 100 for these reasons. Ease to find a place to check zero. Wind and mirage screw with it less. And smaller groups to center up.
If you want to leave it at 200 that's fine. But before you do any adjusting check the zero. If your zero is off 1 moa all your dial ups will be too.
Quote" One question if my MV is set at 2900 FPS and I hit high (while shooting on flat ground ) which direction should I adjust add 10 or 15 seconds or take away ? since I am shooting high "Unquote
If you are hitting high it is because your program has a velocity that is too low. As you raise the velocity in the program it will tell you to dial less moa.
What is one MOA at 200 yards one click on my NF scope or 4 clicks ? Sorry for the dumb question . I use to always zero at 100 yards but folks on here told me to find a load that groups better at atleast 200 yards . I am confident that I can woller one ragged hole at 100
Do you shoot 3 shot groups or 5 shot groups? Thanks