Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Ballistic Coefficient Calculation Question

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-09-2008, 08:30 AM
Lightvarmint
 
Posts: n/a
Ballistic Coefficient Calculation Question

During the last week, I have been testing some prototype .338 265gr hunting bullets. I am down here at virtual sea level (92' elevation) and our calculated BC using velocity over our Oehler 35P at 600 feet and wound up at a very solid .770......... Similar weighted and shaped bullets indicated .776 with the Oehler at 1204 feet downrange.

My question is what would the BC be at 2500, 5000, 7500 and 10000 feet using the same initial velocity and bullet? Or, a better way to ask the question is:

What would be the calcualted BC at the above altitudes. Thanks in advance.

James

Last edited by Lightvarmint; 04-09-2008 at 08:42 AM. Reason: clarification
Reply With Quote

  #2  
Old 04-09-2008, 04:16 PM
Silver Member
 
Join Date: Feb 2008
Posts: 121
Calculated BC and a real BC are two totally different things

Every bullet has different BC at different velocity. (look at Sierra website) I would even go as far as saying, that any bullet fired in a different barrel/twist has its own BC. that will differ from a published data and will be changing differently with downrange velocity.

Peter
Reply With Quote
  #3  
Old 04-09-2008, 04:45 PM
Platinum Member
 
Join Date: Sep 2004
Location: on the rifle range in Utah
Posts: 2,723
Quote:
Originally Posted by Lightvarmint View Post
During the last week, I have been testing some prototype .338 265gr hunting bullets. I am down here at virtual sea level (92' elevation) and our calculated BC using velocity over our Oehler 35P at 600 feet and wound up at a very solid .770......... Similar weighted and shaped bullets indicated .776 with the Oehler at 1204 feet downrange.

My question is what would the BC be at 2500, 5000, 7500 and 10000 feet using the same initial velocity and bullet? Or, a better way to ask the question is:

What would be the calcualted BC at the above altitudes. Thanks in advance.

James

Every individual bullet has a different bc and can only really be accurately calculated for the particular rifle they are to be shot in at the actual elevation and distance that day but ballparking the number is possible. I can tell you that the 300 grain SMK (.338) has a sea level rating of .768 and when I tested it at 11,000 feet from a fairly worn barrel and a crosswind that it raised to .810 at just over 2000 yards.
__________________
Find it
Range it
Click it
Pull it
Dump it

If it's not far, it's boring.
Reply With Quote
  #4  
Old 04-09-2008, 05:37 PM
Lightvarmint
 
Posts: n/a
Quote:
Originally Posted by P KUNDA View Post
Every bullet has different BC at different velocity. (look at Sierra website) I would even go as far as saying, that any bullet fired in a different barrel/twist has its own BC. that will differ from a published data and will be changing differently with downrange velocity.

Peter
Thanks for the answer and I have spent many hours on the Sierra website over the years, but this is beyond what they offer especially since it is not one of their bullets.

You are correct about all of the factors (temp, altitude, speed, twist rate, bullet engraving depth etc) affecting the BC . But maybe you misunderstood the question. I was just wondering what the ballpark average BC would be (from the muzzle to say 1000 yards) with a 3100 fps initial velocity in the gun I tested it in when I got the .770 assuming I changed altitudes from 92 feet to the ones I had listed above and basically kept the same initial velocity + or - a few fps.

I thought you all may have a function that did it in one of those pocket brains that have the different ballistic programs loaded.

James
Reply With Quote
  #5  
Old 04-09-2008, 06:13 PM
Platinum Member
 
Join Date: Nov 2005
Posts: 1,082
On a ROUGH basis:

Assuming 265 grains @ 3100 fps at Sea Level and a BC of 0.770

2500 = BC = 0.829
5000 = BC = 0.8938
7500 = BC = 0.9632
10000 = BC = 1.038

This assumes that the pressure, temperature and everything else is the same! This is HIGHLY unlikely!

That is the reason the you need to shoot for yourself under known conditions.

edge.
Reply With Quote
  #6  
Old 04-10-2008, 07:42 AM
Lightvarmint
 
Posts: n/a
Edge,

Thanks for the calculation...... Now, if I can get the bullet manufacturer to bump the BC up a little from .770 at sea level......

Again, thanks.

James
Reply With Quote
  #7  
Old 04-10-2008, 04:37 PM
Silver Member
 
Join Date: Feb 2008
Posts: 121
James I misunderstud the question completely

However I'm pleased that you've got the right answer elsewhere.

Peter
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Ballistic Coefficient Calculation Question
Thread Thread Starter Forum Replies Last Post
50 BMG Ballistic Coefficient remrifle333 Rifles, Bullets, Barrels and Ballistics 0 04-23-2011 07:19 PM
Ballistic Coefficient (BC) Rogue Reloading 16 11-03-2006 12:35 PM
Ballistic Coefficient daveosok Rifles, Bullets, Barrels and Ballistics 2 08-05-2005 03:37 PM
Ballistic Calculation Help! Rifles, Bullets, Barrels and Ballistics 8 08-19-2004 02:25 PM
Ballistic Coefficient Question Fergus Bailey Rifles, Bullets, Barrels and Ballistics 2 11-25-2001 05:46 PM


All times are GMT -5. The time now is 11:39 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC