Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Anyone want some 7/WSM load info?....

LinkBack Thread Tools Display Modes
Unread 07-01-2002, 11:47 PM
Bronze Member
Join Date: May 2001
Location: Texas
Posts: 63
Anyone want some 7/WSM load info?....

I couldn't find any and I know a few folks
are looking for it. I can't remember who emailed me to keep them informed but I beleive it was some of you guys so here it is. I'm sure some of you will catch the FPS between 62 & 63 grains. The fps was telling me I was reaching max but the primers and cases did not show any signs of pressure. The primers are no where near getting flat yet at 64 grains. I will pick up later and start at 64 gians and go up till I see pressure signs.

These loads were safe in my gun. Use this information at your own risk.

7/300WSM Based on the 300 WSM case not the
7/WSM case.

Bullet: Hornady 162 AMAX

Podwer: H4831SC

Primers: Rem. LR

Grains FPS

59.0 2828

60.0 2880

60.5 2921

61.0 2946

62.0 2972

62.5 2989

63.0 2985

63.5 2992

64.0 3045
Time is a great teacher, but unfortunately it kills all its pupils.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Anyone want some 7/WSM load info?....
Thread Thread Starter Forum Replies Last Post
Need 7mm RUM load info James Jones Reloading 7 02-17-2011 09:23 PM
Need load info for 6.5/06 nctta Reloading 1 07-25-2010 12:44 AM
6.5- 284 load info 1eye Reloading 2 02-17-2009 06:42 PM
.223 Rem. load info. cjp45 Reloading 7 02-26-2006 11:26 PM
.260 Gas Gun load info KS Rifles, Bullets, Barrels & Ballistics 2 08-19-2003 07:47 AM

All times are GMT -5. The time now is 03:51 AM.

All content ©2010-2015 Long Range Hunting, LLC