Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Any loading tips for 6.5-284??

LinkBack Thread Tools Display Modes
Unread 03-15-2002, 10:47 AM
Silver Member
Join Date: May 2001
Posts: 256
Any loading tips for 6.5-284??

I picked up my gun and will start out using 284 Winchester brass. I ordered a Redding full length die and will run the brass thru that first to neck it down. Then, I will run the K&M expander mandrel thru all of them and turn necks. Finally, a Redding neck bushing die will be used, bushing size is .002 under what I want the loaded round to be. Naturally, all cases have been match prepped. Does that sound like the best way to go about this or is there a better method?
Reply With Quote

Unread 03-15-2002, 11:59 AM
Junior Member
Join Date: Mar 2002
Location: USA
Posts: 21
Re: Any loading tips for 6.5-284??

unless you have a tite neck chamber you should fireform the brass before you turn the necks.
if you can see it you can hit it
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Any loading tips for 6.5-284??
Thread Thread Starter Forum Replies Last Post
120 gr Ballistic tips stonepony Long Range Hunting & Shooting 7 06-13-2012 07:08 PM
AR-15 Hand loading tips jmason Reloading 11 05-06-2010 11:31 AM
10/22 tips? Geezer Rimfire and Airguns 23 11-16-2009 04:40 PM
180 gr ballistic tips shooterpunk2 Rifles, Bullets, Barrels & Ballistics 13 06-01-2008 01:32 AM
6mm-06 project, any tips? 270yotekiller Rifles, Bullets, Barrels & Ballistics 8 08-11-2005 07:35 PM

All times are GMT -5. The time now is 10:27 AM.

All content ©2010-2015 Long Range Hunting, LLC