Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Annealing cases??

 
LinkBack Thread Tools Display Modes
  #15  
Old 07-16-2012, 10:58 AM
Platinum Member
 
Join Date: Mar 2012
Location: ND
Posts: 2,770
Re: Annealing cases??

Quote:
Originally Posted by Goofycat View Post
If it goes beyond "dull red," throw away the brass! You've heated it too much! You want only a dull red color. Anneal where there is low light so you can see the color change.
This thread is 8 1/2 years old in case you haven't noticed.
__________________

I'm 16
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
~George Washington

"The only advantage a light rifle has is weight, all other advantages go to the heavy rifle."
~ JE Custom

Biggest fail of 2014 so far... http://www.longrangehunting.com/foru...ea-ftf-128972/

My guess on W3P .308 230 Grain Bullet: G1 .740-.755
Reply With Quote
  #16  
Old 07-16-2012, 11:07 AM
Silver Member
 
Join Date: Sep 2006
Location: Santa Rosa, CA
Posts: 221
Re: Annealing cases??

Quote:
Originally Posted by barnesuser28 View Post
This thread is 8 1/2 years old in case you haven't noticed.
So? What's your point? I did notice the age of the thread, but the information offered still applies today, and there are members who still want to know about the subject. Right?
Reply With Quote
  #17  
Old 07-16-2012, 11:13 AM
Platinum Member
 
Join Date: Mar 2012
Location: ND
Posts: 2,770
Re: Annealing cases??

I was just making sure that you knew that this thread was old and dead.
__________________

I'm 16
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
~George Washington

"The only advantage a light rifle has is weight, all other advantages go to the heavy rifle."
~ JE Custom

Biggest fail of 2014 so far... http://www.longrangehunting.com/foru...ea-ftf-128972/

My guess on W3P .308 230 Grain Bullet: G1 .740-.755
Reply With Quote
  #18  
Old 07-16-2012, 11:23 AM
Silver Member
 
Join Date: Sep 2006
Location: Santa Rosa, CA
Posts: 221
Re: Annealing cases??

Quote:
Originally Posted by barnesuser28 View Post
I was just making sure that you knew that this thread was old and dead.
No thread is "dead." According to your logic, the Constitution is "dead," even though it was written over two hundred years ago. So...you propose that replies should be made only to threads that are less than, say, a week old?

Now, Riley, I know you are only 13 because you said so. I don't wish to get into a back-and-forth argument here, but I do hope that you stick only to the intended content of these threads and...please....don't go into politics.
Reply With Quote
  #19  
Old 07-16-2012, 11:38 AM
Platinum Member
 
Join Date: Mar 2012
Location: ND
Posts: 2,770
Re: Annealing cases??

I see your point about the constitution, but I am not saying that this thread has no value, all i am trying to say is their are multiple threads about annealing that are less than a month old and can have the same information as this one.
__________________

I'm 16
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
~George Washington

"The only advantage a light rifle has is weight, all other advantages go to the heavy rifle."
~ JE Custom

Biggest fail of 2014 so far... http://www.longrangehunting.com/foru...ea-ftf-128972/

My guess on W3P .308 230 Grain Bullet: G1 .740-.755
Reply With Quote
  #20  
Old 07-16-2012, 12:53 PM
Silver Member
 
Join Date: Sep 2006
Location: Santa Rosa, CA
Posts: 221
Re: Annealing cases??

I know that, Riley. Since that's the case, why were you reading this "dead" thread? I could have posted on any of the other similar threads, but I liked this one, regardless of it's being over 8 years old.

I suggest that since you obviously feel that this thread has no value due to its age, that you contact the administrator and have him remove it and stop your complaining. You might also suggest to the administrator that threads be expunged after a certain length of time, and explain to him why. While you are at it, please include your suggested maximum time period.

Any further communication on this thread really would serve no purpose. If you wish to communicate with me from now on, send me a PM.
Reply With Quote
  #21  
Old 07-16-2012, 01:14 PM
Platinum Member
 
Join Date: Mar 2012
Location: ND
Posts: 2,770
Re: Annealing cases??

PM sent.
__________________

I'm 16
"Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth."
~George Washington

"The only advantage a light rifle has is weight, all other advantages go to the heavy rifle."
~ JE Custom

Biggest fail of 2014 so far... http://www.longrangehunting.com/foru...ea-ftf-128972/

My guess on W3P .308 230 Grain Bullet: G1 .740-.755
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Annealing cases??
Thread Thread Starter Forum Replies Last Post
Annealing Cases Buffalobob Videos Of Tech Stuff And Reviews 55 03-24-2012 11:08 PM
How to anneal cases using the Ballistic Edge annealing machine. Len Backus Reloading 2 05-14-2010 12:48 AM
Proper temp for annealing cases? 243yote Reloading 1 02-22-2010 02:29 AM
New cases verses Fire formed cases Topshot Reloading 4 11-02-2009 08:46 AM
Questions about annealing cases Marine sniper Reloading 5 07-14-2008 11:52 AM


All times are GMT -5. The time now is 11:40 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC