Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Action screws not fitting CDI

LinkBack Thread Tools Display Modes
Unread 09-17-2013, 08:31 AM
Silver Member
Join Date: Mar 2003
Location: PA
Posts: 196
Action screws not fitting CDI

Good Morning. I just received my CDI Bottom Metal for my Win Mod 70 Long Action. The Action screws that I have do not fit properly. Is this common? Also, with my old bottom metal I used 3 screws. The CDI only takes 2. Will this effect Accuracy as the middle screw is not used? My stock is the new Manners T6A and has not been bedded yet. Will bedding the action cause the screws to fit better? The screws are a tad long as of now. Any help is appreciated. Thanks.
Reply With Quote
  •   #2  
    Unread 09-17-2013, 11:22 AM
    Platinum Member
    Join Date: Feb 2011
    Location: Cincinnati, Ohio
    Posts: 2,450
    Re: Action screws not fitting CDI

    Take a pic of it and then send the bottom metal BACK. Its evident you didnt get what you needed
    Reply With Quote



    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 02:47 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC