Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Accuracy issue with semi-custom Savage 30-06

LinkBack Thread Tools Display Modes
Unread 09-03-2013, 05:37 AM
Bronze Member
Join Date: Dec 2012
Location: Midlothian Texas
Posts: 71
Accuracy issue with semi-custom Savage 30-06

Im having issues tracking down a issue with the accuracy Im getting with a build I did off of my Savage 111. I am consistently getting 2 flyers approx. to the left during my load development, but the other 3 shots are all within .5 moa and am having a tough time figuring out what is causing it. The Flyers open the group up to 1.1-1.2 moa. The rifle specs are a shilen stainless match 1-10 twist 26" varmint contour, competition recoil lug and barrel nut, rifle basix trigger, the action was timed by stockade gun works as well as bedding the rifle to one of their stocks. Im currently working with a load of a 200gr accubond with 53 grains of imr4350 Winchester brass and a CCI200 primer seated to .010 off the lands. The barrel and barrel nut are also freefloated and the tang is aswell. Does anyone have any Ideas how I can fix this. Thanks.
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 07:50 PM.

All content ©2010-2015 Long Range Hunting, LLC