Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Accuracy with the .300 RUM

LinkBack Thread Tools Display Modes
Unread 11-30-2003, 01:25 AM
Silver Member
Join Date: Dec 2001
Location: Pennsylvania
Posts: 230
Re: Accuracy with the .300 RUM

I am very happy with the result. I had them touch up the crown as well ($35). Perceived recoil was definately substantially reduced but is still more in my opinion than the factory braked weatherby 30-378 that I own with the same bullets. This may be due to the rifle itself being very light with the plastic stock as compared to the Weatherby. I have a laminated stock that I will be installing on the RUM for further reduction but as is I can comfortably shoot more than 40 rounds in a days time. Half a dozen was more than enough before. Turn around early this year was about a week. The bead blasted finish that fades into the factory finish is a touch off from factory but barely noticeable. I will definately be using their services again.

[ 11-30-2003: Message edited by: HoytemanPA ]
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Accuracy with the .300 RUM
Thread Thread Starter Forum Replies Last Post
AR-15 Accuracy Help bookworm Rifles, Bullets, Barrels & Ballistics 19 05-16-2011 09:17 AM
223 accuracy ShortMag3 Reloading 5 05-01-2011 09:22 PM
Help 270 WSM Accuracy, dig Rifles, Bullets, Barrels & Ballistics 11 10-02-2010 02:01 PM
M14 / M1A accuracy Skinny Shooter General Discussion 13 10-01-2009 07:28 PM
.260 accuracy Airborne Rifles, Bullets, Barrels & Ballistics 14 04-28-2004 06:58 PM

All times are GMT -5. The time now is 10:01 PM.

All content ©2010-2015 Long Range Hunting, LLC