close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

7wsm question.....

LinkBack Thread Tools Display Modes
  #1  
Unread 03-31-2004, 08:29 PM
LDO LDO is offline
Silver Member
 
Join Date: Sep 2003
Location: eagle,co
Posts: 251
7wsm question.....

anyone have any problems with runout on this chambering?im thinking about having one built but i dont the really short neck,seems like the 7x300wsm is the way to go,to get a longer neck.any and all info is apreciated-tia-dave
Reply With Quote

  #2  
Unread 04-02-2004, 04:14 PM
Gold Member
 
Join Date: Mar 2004
Location: North Dakota
Posts: 649
Re: 7wsm question.....

Check this site out they can answer your question. www.shortmags.org
__________________
Fast, Flat, and Accurate
Reply With Quote
  #3  
Unread 04-02-2004, 04:35 PM
Bronze Member
 
Join Date: Feb 2004
Location: Wyoming
Posts: 82
Re: 7wsm question.....

Donít sweat the neck length. Runout comes from your reloading dies and a longer neck wonít fix that. The neck has to be long enough to positively hold the bullet during handling and the 7 mm WSM has more than enough. You gain a little case capacity using the factory round and there is none too much in any short mag.

You will be able to more easily get great reloading dies (Redding Competition Bullet Seater and type S bushing dies) in the factory round and that will help with bullet run out.
__________________
John Burns
www.greybullprecision.com
Reply With Quote
  #4  
Unread 04-11-2015, 11:11 PM
Silver Member
 
Join Date: Nov 2012
Posts: 104
Re: 7wsm question.....

I just took delivery of my custom 7x300wsm and I am very pleased with it. don't know much about any of the short mags but I know mine shoots extremely well. it is a defiance deviant action ' benchmark medium palma 1-9 twist barrel XLR element chassis and rifle basix trigger set at 1.9 lbs topped with A nightforce atacr 5.5-25x56.
the builder told me that the neck length does make a difference,
look up vince b. in the UK and read his story about the 7x300 wsm and you will be impressed I think.
good luck on your decision.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 7wsm question.....
Thread Thread Starter Forum Replies Last Post
Barrel twist question?? 7WSM / 180 Bergers Ryan55555 Rifles, Bullets, Barrels & Ballistics 6 11-03-2010 10:03 PM
7wsm vs 7 rem mag remcraz Rifles, Bullets, Barrels & Ballistics 9 04-24-2010 01:43 PM
7wsm Cheyenne19 Rifles, Bullets, Barrels & Ballistics 3 04-27-2009 09:51 PM
7wsm vs. 280 AI grit Reloading 11 02-23-2008 04:30 PM
7WSM COL question PrimeTime Rifles, Bullets, Barrels & Ballistics 3 12-24-2001 10:20 PM


All times are GMT -5. The time now is 02:28 AM.


Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC