Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

7mm Rem throat length/freebore???

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-04-2010, 04:04 PM
Gold Member
 
Join Date: Oct 2009
Location: Central Oregon
Posts: 820
7mm Rem throat length/freebore???

I have a question for everyone who has a factory 7mm of any make. Are you guys able to load your bullets close to the lands while still fitting in the magazine? Iv called remington and they wont help me out or even give me a general idea. Preferably if anyone has a accumark in 7mm rem would really help me out. Thanks
Reply With Quote
  #2  
Old 02-04-2010, 09:31 PM
Silver Member
 
Join Date: Mar 2007
Location: Dallas,OR
Posts: 359
Re: 7mm Rem throat length/freebore???

On my two Rem 700's 243Win and 7mm Mag I can seat the 95 and 168 BergerVLD's respectively at the lands and they fit in the magazines fine. The 243 measures 2.290 and the 7mm measures 2.733 using a stoney point gauge. Hope this helps. I believe an Accumark to be a Weatherby. I hear they are long throated.
Reply With Quote
  #3  
Old 02-04-2010, 09:54 PM
Gold Member
 
Join Date: Oct 2009
Location: Central Oregon
Posts: 820
Re: 7mm Rem throat length/freebore???

I heard they are in the weatherby magnums but not in the standard caliber chamberings like the 7mm rem mag. Thanks
Reply With Quote
  #4  
Old 02-04-2010, 10:26 PM
Platinum Member
 
Join Date: Dec 2001
Location: Potters Hill, NC
Posts: 1,528
Re: 7mm Rem throat length/freebore???

I have a Remington 700 Police and have no problem running 150's out to the rifling and still fitting in the magazine. JohnnyK.
__________________
"The pleasure you get from life is equal to the attitude you put into it."
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 7mm Rem throat length/freebore???
Thread Thread Starter Forum Replies Last Post
7mm Rem throat length/freebore??? ovastafford Long Range Hunting & Shooting 9 02-06-2010 08:49 AM
Freebore, Leade, Throat and Neck diameter for 300 wsm. Dustin_Drews Rifles, Bullets, Barrels & Ballistics 7 08-18-2009 11:51 PM
300 rum throat length trapping Reloading 3 03-27-2009 01:30 PM
300 rum throat length robbor Rifles, Bullets, Barrels & Ballistics 1 06-24-2007 07:30 PM
300 wsm throat length rcreup Rifles, Bullets, Barrels & Ballistics 1 06-18-2006 10:06 AM


All times are GMT -5. The time now is 11:47 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC