close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

7 dakota improved

LinkBack Thread Tools Display Modes
  #8  
Unread 02-16-2010, 11:29 AM
Silver Member
 
Join Date: Jan 2005
Posts: 338
Re: 7 dakota improved

Montana, the reason the 330 was used instead of the 300 was that they ( the guys building the 284 STAK ) found out the brass was much better quality on the 330 brass. Dakota has been upgrading their brass and as of a few years ago when the 284 STAK was built the 300 brass was still poor quality. It may be all the same by now and the 300 brass would obviously make the job much easier to do. --- RHB
Reply With Quote
  •   #9  
    Unread 02-16-2010, 08:26 PM
    Bronze Member
     
    Join Date: Jul 2007
    Location: Northern Utah
    Posts: 83
    Re: 7 dakota improved

    My plan is to do away with the STAK - just to many steps in the brass forming for me and we have never been able to achieve the velocities we hoped for without ruining our brass in a few firings.
    My original question pertained only to the 7 Dakota - seems the way to go for me.
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 7 dakota improved
    Thread Thread Starter Forum Replies Last Post
    .338 lapua improved or 338-378 wby improved 300spanker Rifles, Bullets, Barrels & Ballistics 3 11-24-2010 09:42 AM
    h50 in 300 dakota oldreliable45120 Reloading 0 09-19-2010 07:29 PM
    7mm dakota douglasbeasley Reloading 1 02-08-2007 10:08 PM
    330 Dakota Brass and 300 Dakota Reamer longbow53 Guns For Sale 4 09-21-2006 06:55 PM
    7MM Dakota dwm General Discussion 3 01-05-2006 07:17 AM


    All times are GMT -5. The time now is 10:46 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC