close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

7-300 win mag Why not?

LinkBack Thread Tools Display Modes
  #1  
Unread 01-21-2006, 09:02 AM
Silver Member
 
Join Date: Aug 2005
Location: White City, Saskatchewan
Posts: 218
7-300 win mag Why not?

I was wondering if it has been done. The reason I would like to do it is so that I do not have to buy new Redding competition dies for a 7mm round. I already have the 300 win mag competition dies and thought I could just buy the correct neck sizing bushings to neck it down to 7mm. I guess if nobody else has done it I will be paying about the same amount as the dies for the reamer.
Reply With Quote
  •   #2  
    Unread 01-21-2006, 11:05 AM
    Official LRH Sponsor
     
    Join Date: Jun 2004
    Location: Fort Shaw, Montana
    Posts: 6,847
    Re: 7-300 win mag Why not?

    If thats the only reason for having one built, just go with the 7mm STW and do the same thing you want to with the 7mm-300 Win Mag.

    Only that its a commerical offering so brass is cheap, reamers are cheaper then customers and FL dies are very reasonable, plus you get more bang for your buck in that round as well!!

    Kirby Allen(50)
    __________________
    Kirby Allen(50)

    Allen Precision Shooting
    Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

    Farther, Faster and Flatter then ever before.

    Web Page: www.apsrifles.com

    allenmagnum@gmail.com
    Reply With Quote

      #3  
    Unread 01-21-2006, 11:42 AM
    LB LB is offline
    Silver Member
     
    Join Date: Jul 2004
    Location: Upland, CA
    Posts: 423
    Re: 7-300 win mag Why not?

    In my judgement, you have a weak motive. Sell your dies on ebay or similiar, and chamber a barrel for one of several 7MM cases. if that's what you must have.

    Years ago, I thought I desperately needed a 7MMRemMag. But, I got a deal on a 300 Winchester. After comparing all the data, I wondered what I thought was so great about the 7? Now, like everybody else, I can (and do) select numbers that favor the 300.

    I firmly believe that there is not, one best solution. There are a number of solutions. Unless you are the type that needs something different, at any cost, I'd stick with what you have. It's a good one.

    Good hunting. LB
    Reply With Quote
      #4  
    Unread 01-21-2006, 06:56 PM
    Bronze Member
     
    Join Date: Feb 2005
    Posts: 37
    Re: 7-300 win mag Why not?

    My buddy has a variant of that smithed by Dan Dowling. You might look up Either 7mm Mashburn or & 7mm Super Mashburn. Its not what I would consider a super LR cartridge but it's very accurate. Its similar to a standard 7mm Rem Mag. As I recall he has to form cases and has a special Die set to do that. His is more work than a standard Ackley

    Good Luck
    Mark
    Reply With Quote
      #5  
    Unread 01-22-2006, 02:41 PM
    Bronze Member
     
    Join Date: Sep 2002
    Location: Las Vegas,Nv.
    Posts: 65
    Re: 7-300 win mag Why not?

    I had a 7-300 built on a Mauser Mark X action with a 26" pac-nor bbl.I was in my balls out velocity phase,and just wanted speed,and decent (1") accuracy.I used to push 160gr bullets out at about 3340fps.Of course I only got about 2 loadings until my primers would fall out.I took game out to 600yds with this combo,using 76gr of IMR 7828 and alternating between Nosler Partitions and Barnes X's.(both 160gr).
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 10:12 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC