close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

6mm/284

LinkBack Thread Tools Display Modes
  #1  
Unread 10-27-2012, 07:51 PM
Bronze Member
 
Join Date: Jul 2009
Location: North Central Mississippi
Posts: 81
6mm/284

Will I have any issues if I build a 6mm/284 using a 700 rem 30-06 action? I had some say there would be feeding issues. I know one of you guys have done this. Looking forward to your input...........Thanks
Reply With Quote
  •   #2  
    Unread 10-28-2012, 01:38 AM
    Gold Member
     
    Join Date: Jul 2008
    Location: Base of the Bluemountains aka Gods Country
    Posts: 525
    Re: 6mm/284

    I cant remember how it was on here before i thought either shawn or kirby said they like the 6mm-06 better just for that reason. you would also get the same performance. I know a lot of people like the 6-284.I was going to have built until i was talk out off it because of feeding problems. I am kind off surprised the 6-06 is not more popular.
    Reply With Quote

      #3  
    Unread 10-28-2012, 04:16 AM
    Gold Member
     
    Join Date: Jul 2007
    Posts: 532
    Re: 6mm/284

    My son in law had one built and we've had more trouble with it than it's worth.. watch which reamer you get the chamber cut with..one uses the norma case as it's base and the other the original 284 win... we had more problems with poor case life, difficulty getting it to work smoothly, the original gun smith wasn't the best and we've had it re-reamed since but I have spent too much time with it lately...I'm sure it's a fine long range big banger but watch who does your work and what case his reamer is designed off... as far as hard on throats, we've never fired that many shots out of it to find out.
    Reply With Quote
      #4  
    Unread 10-28-2012, 06:22 AM
    Platinum Member
     
    Join Date: Dec 2005
    Location: Tucson Az
    Posts: 1,983
    Re: 6mm/284

    Darn buttons...how do you remove this completely?

    Last edited by AZShooter; 10-28-2012 at 06:27 AM. Reason: double posting
    Reply With Quote
      #5  
    Unread 10-28-2012, 06:25 AM
    Platinum Member
     
    Join Date: Dec 2005
    Location: Tucson Az
    Posts: 1,983
    Re: 6mm/284

    I spent quite a bit of time on the net reading all I could about the 6mm-284 before making one. I ordered a reamer from Dave Kiff at Pacific Tool and Gauge. I neck down 6.5-284 Lapua brass. I use a SA Rem 700 with a Wyatt's mag box, OAL 2.990". No problems with feeding.

    I would think you shouldn't have an issue with feeding from a long action but haven't done it so cannot say for sure.

    As for barrel twist the first one has a 1 in 7.5 but the second barrel has a 1in 8 twist. Originally thought I wanted to shoot 115 DTACs but they wouldn't shoot accurately enough for me. Moved to 107 Sierra MK. When Berger came out with their 105 hybrid I switched again. The next barrel will be shooting that bullet.

    Current barrel has 939 through it. The throat and a foot down the barrel looks horrible in the borescope but it still shoots under 1/4 MOA. Much of the wear was trying to get the DTAC to shoot. Do yourself a favor and don't spend too many rounds on one bullet if it won't shoot.
    -----------
    Since I had the above rifle built I began installing and chambering my own rifle barrels. Using Rem takeoffs for the time being. Made two 6mm-284s so far. First was the learning barrel, a 20", and it shot okay with a fireball with each shot. Second barrel is on a SA Rem 700 and it shoots the 55 gr nos bt at 4185 fps. It is a hoot to wack jackrabbits and other varmints. Using 284 brass in that one. Never noticed any difference in the fit with the brass in the chamber. To help neck down the 284 brass I used the chamber reamer into an old 264 win mag barrel to make a forming die. It is perfect as the halfway to getting the neck down to 6mm.

    UseS RL-22 and later Retumbo with the 107 sierra. Used Retumbo with the 105 berger hybrid. Most recently began using RL-33 with the Berger hybrid and gained some velocity. Using Varget in the 24" 6mm-284 and the 55 gr nos bt.

    Hope some of this helps.
    Reply With Quote
      #6  
    Unread 10-28-2012, 02:09 PM
    Bronze Member
     
    Join Date: Jul 2009
    Location: North Central Mississippi
    Posts: 81
    Re: 6mm/284

    Thanks for the input gents, I did some more research and found that the 6mm/06AI is more cartridge than either. I can fire form 6/06 cases using the old Cream Of Wheat method, and don't have to worry with extra barrel wear. If I am wrong on this please comment...........
    Reply With Quote
      #7  
    Unread 10-29-2012, 08:39 AM
    Bronze Member
     
    Join Date: May 2012
    Location: Texas
    Posts: 57
    Re: 6mm/284

    I have two, both cut with same reamer, 6.5-284 Lapua brass:

    27" PacNor 1-8, 117 DTACs are precision in this one

    30" Shilen 1-10, 87-90 gr Bergers

    Brass life is very good, other than a few that get a little beat up during ladder testing....

    Size with single pass in Redding sizer, turn necks and use same brass in both rifles.

    Best thing to increase barrel life, run a patch or two down the tube, after every 5 or so shots....barrels are cheaper than bullets.

    No matter which one you pick, you will like it.
    __________________
    The terrain sure looks a hell of a lot different whe you'er crawling through it!

    FUBAR,
    Wounded Warrior Alumni
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 08:22 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC