Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

6.5-300 RSUM

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-03-2002, 01:29 PM
 
Posts: n/a
Re: 6.5-300 RSUM



[ 07-12-2003: Message edited by: S1 ]
Reply With Quote
  #2  
Old 12-03-2002, 02:09 PM
Silver Member
 
Join Date: May 2001
Posts: 256
Re: 6.5-300 RSUM

There have been many versions of the rem and win short mags necked to 6.5 and it has been going on for a year now. There are usually reamers ready before the brass is even available.
Reply With Quote
  #3  
Old 12-04-2002, 12:43 AM
Junior Member
 
Join Date: Oct 2002
Location: Alberta
Posts: 24
6.5-300 RSUM

So I'm convinced that the 6.5-284 is a great, accurate & efficient caliber. I've also concluded that the 6.5 WSM is real tough on barrels for the extra FPS you get. What I haven't seen is info. on the 300 RSUM necked down to 6.5. I presume that most of what applies to the 6.5-300 WSM would apply to a 6.5-300 RSUM but maybe I'm overlooking something. I know that there is a 7.5 % difference in case capacity and that the RSUM would allow the use of a Rem. action. Does a 6.5-300 RSUM exist yet as a wildcat? Any whispers of a factory version? If so, I think I'll wait a bit before I get a 6.5-284 built. ANY input would be greatly appreciated.

TGS
Reply With Quote
  #4  
Old 12-10-2002, 11:12 PM
Silver Member
 
Join Date: Dec 2002
Posts: 374
Re: 6.5-300 RSUM

Hey Scott,

For what it's worth, it sounds like you think the WSM cant be built on a remington action. Don't be fooled by the 555 case diameter, the base is still 512 (rebated like a 284) and has the same bolt face as a belted mag. It's a drop in for a long action.
__________________
If you have something that you disassemble and reassemble enough times, sooner or later, you'll have two!
Reply With Quote
  #5  
Old 12-10-2002, 11:36 PM
Silver Member
 
Join Date: Dec 2002
Posts: 374
Re: 6.5-300 RSUM

As for "tough on barrels", that depends on who builds the gun and if they know how to throat one. also what type of powder you use and weather or not you think it's a race to see who's bullet arrives first. a 6.5WSM will get you 3300fps from a 140 with 67gr 4831sc. The barrel won't heat up. You'll love it. Throat erosion is a phenomenon caused by a gun builder who can't run a reamer. The blow-by caused by the square or hex shaped hole made with a 5 flute reamer in a 4 or 6 groove barrel is the problem. Also, new reamers are very bad as they are very prone to chatter. You need to hog some material for a while and dull them a bit. A Resharpened, dammaged reamer is a plus also.. It may well be slightly undersize and since reamers always make oversize holes the end result will be a better chamber. I think that many gun builders who have old reamers are fortunate to have them because they actually work better than new ones.

Don't worry about wearing out a barrel. I know of a guy who has a retired 300 weatherby improved that has I think he said 8 full seasons on it and still shoots 5". It's the gun that put him in the PA hall of fame and it's not shot out. My brothers AR15 Match gun with a Stock Colt Hbar has 22000 rounds through it and still shoots 3/8MOA. 20 rounds in 3/4" at 200 Yds out of a 223 Semi Auto. Not bad, eh. Not worn out!

The person who shot the PA 1000yd world record shot it with a gun that he was not going to bring to the range because the barrel was "shot out". Well, he shot 3.151". The reason these shot out barrels work so well is because the throat that has "eroded" is actually just rifling that has "eroded" The bullet now actually sits in a cavity that is the nominal size of the bullet and does not allow the same blowby as the brand new, .002 on a side oversize throat.

happy shooting.
__________________
If you have something that you disassemble and reassemble enough times, sooner or later, you'll have two!
Reply With Quote
  #6  
Old 12-11-2002, 10:25 AM
Junior Member
 
Join Date: Oct 2002
Location: Alberta
Posts: 24
Re: 6.5-300 RSUM

Thanks! As usual, there's alot of opinions out there, some based on experience and facts, some based on rumors and lack of experience! That's why I appreciate the input I get here, most of you guys have done the things I ask about and I appreciate your advice. My first hand experience with the topics I post is limited, otherwise I wouldn't ask. As expected, opinions are always a factor, to some, the extra 200 fps is worth all of the potl. negatives and then some, to others, the extra recoil, bbrl. wear, bbrl. length required to make use of the extra powder, etc. just don't make sense. The bottom line is that neither is wrong, and BOTH are right for THEIR needs. I guess if all I was worried about was what I NEEDED, I'd just go buy an off the shelf .270 and go hunting!

Thx. and take care. Have a Merry Christmas!

TGS
Reply With Quote
  #7  
Old 12-11-2002, 11:43 AM
Platinum Member
 
Join Date: May 2001
Location: Lock Haven P.A.
Posts: 1,071
Re: 6.5-300 RSUM

Hi Phil,glad you could make it..... [img]images/icons/grin.gif[/img]
__________________
Boyd Heaton...
EAGLE VALLEY OFFROADERS CENTRAL,PA
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 6.5-300 RSUM
Thread Thread Starter Forum Replies Last Post
FS: Savage Model 11G 300 RSUM bailey1474 Guns For Sale 7 02-28-2006 07:59 PM
300 WSM vs 300 RSUM Rifles, Bullets, Barrels and Ballistics 6 04-27-2004 03:16 PM
Rifles FS - NIB WSM, RUM, RSUM or Std. Cal. Northlander Guns For Sale 2 02-26-2004 09:04 PM
FS: Remington 700 BDL, 300 RSUM, 24", Blue/Walnut eich Guns For Sale 0 02-08-2003 12:39 AM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 11:06 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC