close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

6.5 .284 powders

LinkBack Thread Tools Display Modes
  #8  
Unread 03-13-2003, 11:27 AM
Gold Member
 
Join Date: Mar 2002
Location: mi
Posts: 991
Re: 6.5 .284 powders

FatBoy
I used the flash hole reamer that S1 makes.

Reaming the flash holes really maid my 6.5/284 come alive I am having a blast shooting it lately I may get a bolt for my big gun and have a 1.450 30" 1-8.5 Krieger barrel turned up for it with the same reamer you just cant have enough good barrels for one gun laying around.


The barrel is a Krieger 1-8.5 twist 28" long I am shooting right now.

Crow Mag
__________________
If you think something is not possible move out of the way so the ones that are doing it can
Reply With Quote
  •   #9  
    Unread 03-13-2003, 01:29 PM
     
    Posts: n/a
    Re: 6.5 .284 powders

    Fat Boy

    If you have to have one, send me a check, and I will take care of ya. You could always make it easy on me and get a couple of your friends to order one at the same time. [img]images/icons/grin.gif[/img] Any body else need one this month, speak up now and I will handle your order with Fat Boy's. [img]images/icons/smile.gif[/img]
    Reply With Quote

      #10  
    Unread 03-13-2003, 01:35 PM
     
    Posts: n/a
    Re: 6.5 .284 powders

    Crow Mag,

    Now that you have had a chance to load test a little, have you seen a significant reduction in vertical dispersion once a load is worked up with properly reamed flash holes?
    Reply With Quote
      #11  
    Unread 03-13-2003, 02:04 PM
    Silver Member
     
    Join Date: Sep 2002
    Posts: 332
    Re: 6.5 .284 powders

    I shot my 6.5 today and got decent groups with the 4831sc but the guy that built the gun said to use accurate 4350(50grns) with the 142MK's so I loaded 15 with that and they were the best by far but i think they were a bit hot,I could lift the bolt handle easy but hard to pull back and I could see extractor marks on the case so I think I will back it off and see how it shoots oh and it was doing 3120 to 3172fps with the 4350.what velocity should i be trying to stay at with the 142's?
    I am useing the lapua brass and read the post about the flash hole reamers,what is the deal with that? is there some special way to do it? if so where do i get this wonder tool.
    by the way my gun is a started out as a tikka M595 then went to accufilte in PA and got a 28" walther 1:8 reverse taper barrel and a trigger job and wears a 8X32 NXS.

    Jared

    [ 03-13-2003: Message edited by: jared ]
    Reply With Quote
      #12  
    Unread 03-13-2003, 02:11 PM
    Bronze Member
     
    Join Date: Aug 2002
    Location: N.W. PA
    Posts: 31
    Re: 6.5 .284 powders

    S1
    Spin me one up as well while your at it.
    E-mail me your address and total bill
    and i'll get you a check in the mail.

    Thanks

    tomahawk@greatlite.com
    Reply With Quote
      #13  
    Unread 03-13-2003, 02:40 PM
     
    Posts: n/a
    Re: 6.5 .284 powders

    Tomahawk #1

    Roger that.

    Anyone else:

    To receive a reamer please include the following with your order:

    Name_____________________

    Shipping ADDRESS___________________________

    Check for $45.00 Payable to: A.R. Tactical, LLC
    State whether you want a large rifle reamer, or small rifle reamer or both. Add an additional $40.00 for a second reamer.

    I will mail your reamer to the address you provide, no additional charge.

    Mail your order to:

    A.R. Tactical, LLC
    PO BOX 470
    Chesterfield Mo 63006
    Reply With Quote
      #14  
    Unread 03-13-2003, 02:48 PM
    Platinum Member
     
    Join Date: May 2001
    Location: Casper Wy
    Posts: 1,377
    Re: 6.5 .284 powders

    put me on the list too if ya would,check is in the mail=CJ
    __________________
    "Make everything as simple as possible, but not simpler." -Albert Einstein (1879-1955)
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: 6.5 .284 powders
    Thread Thread Starter Forum Replies Last Post
    old powders Booney Reloading 6 03-31-2010 10:45 PM
    powders for 300 WSM flyin lizard Reloading 14 10-11-2009 08:07 PM
    Powders for 308 trebark Reloading Equipment and Components 10 07-22-2009 10:14 PM
    New powders! Tyler Kemp Reloading 1 01-20-2009 06:33 PM
    300 WSM powders Hunter66654 Rifles, Bullets, Barrels & Ballistics 17 03-04-2004 05:57 PM


    All times are GMT -5. The time now is 11:10 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC