Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

.375/416 Barret?

LinkBack Thread Tools Display Modes
  #36  
Unread 03-30-2010, 05:08 PM
Gold Member
 
Join Date: Sep 2003
Location: Nebraska
Posts: 810
Re: .375/416 Barret?

Sweeeeeeeeeeeet!
__________________
www.cowboy-dave.com

"Let the good times roll"
Reply With Quote

  #37  
Unread 03-30-2010, 05:57 PM
Bronze Member
 
Join Date: Feb 2008
Location: Auburn Indiana
Posts: 38
Re: .375/416 Barret?

Awesome man! So what's the case cap? What about neck length?

-AP
Reply With Quote
  #38  
Unread 03-30-2010, 07:18 PM
Platinum Member
 
Join Date: Jan 2007
Location: MS
Posts: 1,652
Re: .375/416 Barret?

Dave,

What is the capacity and rim diameter on the 375 viersico....wish I had known you were working on this before I got so deep in what I am playing with. I would have placed an order instead of muddling around. I am enjoying playing with the fifty I bought as a donor, so not all is lost.
__________________
I admit that I know just enough to be dangerous.....but dangerous at ever extending distances.
Reply With Quote
  #39  
Unread 03-30-2010, 07:23 PM
Platinum Member
 
Join Date: Jan 2007
Location: MS
Posts: 1,652
Re: .375/416 Barret?

Extremist,

I do not have my print handy, so I cannot say on the neck length, no idea on the capacity off the top of my head. I played with it in quick design a while back but cannot recall capacity.
__________________
I admit that I know just enough to be dangerous.....but dangerous at ever extending distances.
Reply With Quote
  #40  
Unread 03-30-2010, 07:37 PM
Bronze Member
 
Join Date: Feb 2008
Location: Auburn Indiana
Posts: 38
Re: .375/416 Barret?

Is that an actual case there in the photo? If so, grab your calipers and scale man! The 375VM is bases off a .688 case head and design to funtion through standard magnum sized actions. Not quite your 50 (.809) action size. Still, it is likely to be a better option when it comes to powder choice and efficiency.

-AP
Reply With Quote
  #41  
Unread 03-30-2010, 08:13 PM
Platinum Member
 
Join Date: Jan 2007
Location: MS
Posts: 1,652
Re: .375/416 Barret?

That is just a 416 case, it has not been formed yet. I might cut a chamber to fireform with this week end. If I get around to forming a few cases, I will let you know the answers to your queries.
__________________
I admit that I know just enough to be dangerous.....but dangerous at ever extending distances.
Reply With Quote
  #42  
Unread 03-30-2010, 08:17 PM
Bronze Member
 
Join Date: Feb 2008
Location: Auburn Indiana
Posts: 38
Re: .375/416 Barret?

Thank you!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: .375/416 Barret?
Thread Thread Starter Forum Replies Last Post
416 barret and a 450 gr hornady kfbrown14 Reloading 0 05-04-2011 11:57 PM
Rebarreling a 338 Barret? volunteerbee Rifles, Bullets, Barrels & Ballistics 2 12-18-2010 05:07 PM
375/416 Barret rigmaster10 Rifles, Bullets, Barrels & Ballistics 4 12-14-2010 10:27 PM
Hunting w/ 416 Barret daveyj Long Range Hunting & Shooting 1 01-22-2008 12:08 AM
Barret .416? tdv75098 Equipment Discussions 14 02-09-2007 01:38 PM


All times are GMT -5. The time now is 09:18 AM.


All content ©2010-2015 Long Range Hunting, LLC