Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


338 RUM problems

LinkBack Thread Tools Display Modes
Unread 02-13-2008, 07:06 AM
Silver Member
Join Date: Feb 2005
Location: Northeast Ohio
Posts: 301
Keep us updated on the new barrel. I finally got around to reading all of this and am hoping you get that all important "peace of mind" with the new tube after breaking it in
Poor mans LR rifle=Rem 700P.308/Elite 4200 6-24x50/Millet base/Burris Xtreme rings/Eagle stockpack/Harris 9-13" bipod
Reply With Quote

Unread 02-13-2008, 07:31 AM
Bronze Member
Join Date: Jan 2008
Location: half way between Buffalo,NY and Rochester,NY
Posts: 60
Did you say you had a brake on it ,,,,if so check and see if the bullets are hitting the brake on the way through.If not then I would stay away from a crome-moly and stay with a SS barrel, they are always smother rifling.Tim
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: 338 RUM problems
Thread Thread Starter Forum Replies Last Post
.338 win mag problems GermanXJ Rifles, Bullets, Barrels & Ballistics 8 01-16-2011 01:03 PM
Die Problems?? gunaddict62791 Reloading 3 01-07-2011 06:23 PM
Fn SPR mag problems Ian B Rifles, Bullets, Barrels & Ballistics 0 09-21-2010 12:51 AM
300 RUM problems asfornea2 Reloading 6 01-05-2009 11:01 AM
Bad problems poleok Member Introductions 0 09-16-2008 01:44 PM

All times are GMT -5. The time now is 12:09 AM.

All content ©2010-2015 Long Range Hunting, LLC