Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

338 Lapua chamber specs

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-26-2012, 05:22 PM
Silver Member
 
Join Date: Aug 2011
Location: Lexington, KY
Posts: 272
338 Lapua chamber specs

Has anyone seen the chamber specs created by James Boatright for the 338 Lapua? He designed the reamer for no neck turn Lapua brass and 300 SMK to touch the lands at 3.840".

It is located on the wellguidedbullet website. It is the modified Kiff print with Boatright Custom Guns stamped in the top left corner of the print. The specs are quite a bit different than the Kiff print. Just asking as I am waiting to hear back from Kiff on his recommended reamer for my project and thought this article and print was interesting.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: 338 Lapua chamber specs
Thread Thread Starter Forum Replies Last Post
6.5x284 lapua brass in 6.5x284 win chamber chw Rifles, Bullets, Barrels & Ballistics 13 11-17-2014 05:57 PM
Can I re cut a 260rem chamber to AI specs without setting my barrel back? ICANHITHIMMAN Gunsmithing 7 03-20-2010 10:42 AM
FS 338 lapua chamber finish reamer 300win Reloading Equipment and Components 1 03-16-2010 09:10 AM
30-378 chamber specs needed. Norz Rifles, Bullets, Barrels & Ballistics 11 02-12-2007 07:49 PM
Specs for a 338 RUM NotEnoughTriggerTime Rifles, Bullets, Barrels & Ballistics 1 12-29-2004 10:42 PM


All times are GMT -5. The time now is 07:28 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC