338 Edge Velocity Information

I realize that there are a lot of posts out there discussing the 338 Edge. However, some are older posts and I wanted to get the most current information if you please. I need the muzzle velocity information with the different powders you guys are using on four different combinations of barrel lengths and bullets:

30" w/300 SMK

28" w/300 SMK

30" w/250 SMK or Accubond

28" w/250 SMK or Accubond

All responses providing information or confirming another posting in the thread will be very much appreciated. BTW, I really do not need any 225 grain bullet information. Thanks in advance.

Lightvarmint

[Lost creek]

My 338 Edge with a 28" barrel is getting 2825 fps. with a 300 smk.
93 grs. H-1000, CCI 250 primer

[davewilson]

do you want the highest velocity that can be obtained or the velocity with the most accuracy?

Originally Posted by davewilson

do you want the highest velocity that can be obtained or the velocity with the most accuracy?

Dave thanks for your response.... I am seeking the information on the velocity that the shooters get when they are shooting accurate enough to use it for hunting. In other words, their hunting load velocity. But, if you have other numbers, that will also shed light. Don't be shy.

James

[slymule]

I'm getting 2870fps with my Edge. I'm using 93gr. of H-1000, CCI 250 primer, Remington brass, 28" Broughton barrel.

[remingtonman_25_06]

I am getting 2840fps with the 300g SMK using 92g H-1000, CCI 250, R-P case, out of my 28" HART.

[davewilson]

i don't have a 28 or 30" barrel but i do have one that's finished at 29! my accuracy load went 2775 with the 300smk was 92 h1000, 250 and rem cases. the 250smk goes 3050 with 97gr of h1000, 250 and rem cases. i can shoot the 250's close to 3200. this is with a Rock Creek 10 twist barrel.