Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


338 Edge?

LinkBack Thread Tools Display Modes
Unread 11-13-2013, 11:55 PM
Gold Member
Join Date: May 2004
Location: Alaska
Posts: 824
Re: 338 Edge?

If you go with 338 RUM you are left with zero options for brass other than 338 RUM
with the 338 Edge you have a bunch of options for brass....

Remington, Nosler, Norma, Federal all make brass for the 300 RUM
and you can get 338 Edge brass from Defensive Edge, a fantastic option if you will travel to countries that require your ammo stamp to match your rifle...

and if you can get 375 RUM brass it can also be made to run the 338 Edge... I have done that as a friend does not reload and gives me all his brass...

and finally the cheapest option....... sandpits, gravel pits and shooting ranges..... I have picked up nearly 500 pcs of mixed 300 RUM brass over the years, ALL of it was new once fired brass upon inspection.....

any of this make sense ?
How is it y'all still don't know the difference between CALIBER and CARTRIDGE ??

"In guns, particularly firearms, caliber or calibre is the approximate internal diameter of the barrel, or the diameter of the projectile it fires."

"Fear of weapons is a sign of retarded sexual and emotional maturity"
Sigmund Freud
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 10:04 AM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC